3M 6054 Gas filter K1 against ammonia

3M® 6054 K1 gas filter is a high-quality filter for 3M half and full-face respiratory masks with a bayonet click connection.Protection AgainstK1: Ammonia and organic ammonia derivativesFeaturesBayonet click connection for quick and secure filter installationCompact and lightweight for high wearing comfortEffective adsorption using high-quality activated carbon bonded mediaCompatible with 3M mask series , , 6500, 7000 and 7500Ideal for industrial environments involving ammonia or related substancesTechnical DataFilter TypeK1WeightApprox. 200 g (per pair)ConnectionBayonet click connection for 3M masksStandardsPersonal Protective Equipment (PPE) Category IIIEN 14387:2004+A1:2008 – Gas filterMaterialsFilter medium: Activated carbon bonded fabricHousing: Polypropylene, polystyreneStorage and PackagingShelf life: 5 years from manufacturing date (if unopened and properly stored)Replace no later than 6 months after openingStorage temperature: -20 °C to +25 °C (temporarily up to +38 °C allowed)Maximum relative humidity: < 80%Packaging: Packed in pairs, 4 pairs per box, 8 boxes per carton (32 pairs)Overview Table of Filter ClassesFilter ClassMeaningTypical Application / ProtectionParticulate Filters (P Classes)P1For coarse mechanically generated particles(up to 4 times the limit value)Grinding, milling, drillingP2For finer mechanical and thermal particles(up to 10 times the limit value)Welding, soldering, fine dustP3For highly toxic or very fine particles(up to 30 times the limit value)Asbestos, mold, viruses, nanoparticlesGas and Vapor Filters (A–K, Hg, AX)AOrganic vapours (boiling point > 65 °C)General protection against solventsA1Like A, with lower capacityWater-based paints, paints with residual solventsA2Like A, with higher capacityPetrol, paint thinners, solvent-based paints, adhesivesBInorganic gases/vapoursChlorine, hydrogen sulphide, hydrogen cyanideEAcid gases/vapoursSulphur dioxide, hydrochloric acid, acid mistsK*Ammonia and derivativesFertilizers, slurry, laboratory processesHgMercury vapourLaboratory accidents, hazardous waste (max. 50 h use)AXOrganic vapours (boiling point < 65 °C)Highly volatile solvents (only with full-face mask)Additional MarkingsRReusableSuitable for multiple work shiftsNRNot reusableApproved for one work shift onlyDDolomite dust test passedIncreased service life under high dust load* Note: Please ensure that the selected respiratory protective equipment is suitable for the specific hazardous substance and its concentration before use, in accordance with applicable regulations and standards. Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds