3M Scotch-Weld 7260 FC Two part epoxy structural adhesive 400ml

For excellent adhesion to metallic surfaces and thermostats, and good adhesion to thermoplastics use 3M™ Scotch-Weld™ Epoxy Adhesive 7260 B/A. Our two-part, toughened adhesive has high shear and peel adhesion, good chemical resistance and is long-lasting.CharacteristicsGet a long-lasting adhesive with high shear and peel adhesionApply to metallic surfaces and thermostatsChoose a tough epoxy adhesive for working with thermoplasticsHigh adhesion with good chemical resistanceGood aging resistanceVolume: 400 mlApplicationsApply as an excellent adhesive for metallic surfaces and thermostats. Ideal for thermoplasticsTechnical specifications General Properties Part B Part A Color Black Off-white Base Modified epoxy Modified amine Consistency Thixotropic paste Thixotropic paste Density 1.04 g / cm³ 1.03 g / cm³ Viscosity 250 Pas 75 Pas Mix ratio by weight (by volume) 100 : 50 wt. (100 : 50 vol.) 100 : 50 wt. (100 : 50 vol.) Work life and open time at 23 ± 2 °C > 120 minutes > 120 minutes Handling strength 4 hours 4 hours Full cure cycle 7 days at room temperature 7 days at room temperatureHazard Information (CLP)Signal Word: Danger / WarningHazard Statements (H-Phrases)H314: Causes severe skin burns and eye damage.H317: May cause an allergic skin reaction.H315: Causes skin irritation.H319: Causes serious eye irritation.H410: Very toxic to aquatic life with long-lasting effects.Safety Precautions (P-Phrases)Prevention:P260A: Do not breathe vapour.P280D: Wear protective gloves/protective clothing/eye protection/face protection.P273: Avoid release to the environment.P280E: Wear protective gloves.Response:P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310: Immediately call a POISON CENTER or doctor/physician.P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P391: Collect spillage.Product Identifier3,3′-Oxybis(ethylenoxy)bis(propylamine): CAS No. 4246-51-9, EC No. 224-207-2, 15-40%2-Propennitrile, Polymer with 1,3-Butadiene: CAS No. 68683-29-4, 5-20%2,4,6-Tris(dimethylaminomethyl)phenol: CAS No. 90-72-2, EC No. 202-013-9, 3-7%2-Piperazin-1-ylethylamine: CAS No. 140-31-8, EC No. 205-411-0, < 1%Reaction mass of 2,2'-[Methylenbis(2,1-phenylenoxymethylene)]bis(oxirane): EC No. 701-263-0, 15-40%4,4'-Methylenediphenyl diglycidyl ether: CAS No. 1675-54-3, EC No. 216-823-5, 10-30%1,4-Bis[(2,3-epoxypropoxy)methyl]cyclohexane: CAS No. 14228-73-0, EC No. 238-098-4, 5-10%Other HazardsThis material does not contain substances classified as PBT or vPvB.Contains 4% components with unknown hazards to aquatic life (Part A).Contains 26% components with unknown hazards to aquatic life (Part B).×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds