3M Scotch-Weld DP100 Two part epoxy structural adhesive 50ml

3M Scotch-Weld 2-component epoxy resin-based construction adhesive for the EPX System DP 100, transparent, 50 ml3M Scotch-Weld DP100 is a hard, 2-component, epoxy resin-based construction adhesive for the EPX system. The product with a very short processing time achieves high shear strength under static loads and is characterized by transparency, pourability and quick and easy processing. Scotch-Weld DP 100 is UL listed and was developed for bonding metals such as steel, aluminum, copper, brass and a variety of plastics such as PC, rigid PVC, GRP, ABS as well as other materials such as glass and ceramics.CharacteristicsProcessing time of 3 to 5 minutesHardHigh shear strengthStatic loadUL listedMixing ratio 1:1Important: Mixing nozzle, feed piston and EPX hand processing device are not included with the adhesive. Please order these accessories separately.AdvantagesVery short processing timeVery suitable for pottingProduct benefitsThe first load on the joined parts is possible after a very short timeArea of applicationBonding of metals, plastics such as ABS, GRP, PC etc. as well as glass and ceramicsTechnical specifications General Properties Part B Part A Color Black Off-white Base Modified epoxy Modified amine Consistency Thixotropic paste Thixotropic paste Density 1.04 g / cm³ 1.03 g / cm³ Viscosity 250 Pas 75 Pas Mix ratio by weight (by volume) 100 : 50 wt. (100 : 50 vol.) 100 : 50 wt. (100 : 50 vol.) Work life and open time at 23 ± 2 °C > 120 minutes > 120 minutes Handling strength 4 hours 4 hours Full cure cycle 7 days at room temperature 7 days at room temperatureHazard Information (CLP)Signal word: Danger (Part A), Warning (Part B)Hazard Statements (H-phrases)H314: Causes severe skin burns and eye damage. (Part A)H317: May cause an allergic skin reaction. (Part A, Part B)H412: Harmful to aquatic life with long-lasting effects. (Part A)H315: Causes skin irritation. (Part B)H319: Causes serious eye irritation. (Part B)H411: Toxic to aquatic life with long-lasting effects. (Part B)Safety Precautions (P-phrases)Prevention:P260A: Do not breathe vapours. (Part A)P280D: Wear protective gloves/protective clothing/eye protection/face protection. (Part A)P273: Avoid release to the environment. (Part B)P280E: Wear protective gloves. (Part B)Response:P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. (Part A)P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (Part A, Part B)P310: Immediately call a POISON CENTER/doctor. (Part A)P333 + P313: If skin irritation or rash occurs: Get medical advice/attention. (Part A, Part B)Disposal:P501: Dispose of contents/container in accordance with local/regional/national regulations. (Part B)Other HazardsNo other known hazards. (Part A, Part B)This material does not contain substances considered PBT or vPvB. (Part A, Part B) Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds