3M Scotch-Weld EC-9323-2 B/A Two Part Structural Adhesive 1l

3M™ Scotch-Weld™ Structural Epoxy Adhesive EC-9323-2 B/A is a thixotrophic, sag-resistant, two component epoxy paste adhesive which cures at room temperature or with mild heat to form a tough, impact resistant structural bond. It has an excellent adhesion to a wide variety of substrates such as metals, glass, ceramics and plastics, incl. GFRP and CFRP.Once cured it provides very high shear and peel strength over a wide temperature range, with excellent resistance to harsh environments and chemicals commonly encountered in aerospace applications. Typical applications are aircraft interior panel bonding, ditch and pot, insert, or bracket bonding. The product is available in a white and a black version.Content: 1000 mlHighlightsThixotrophic, non- sag, full room temperature processable,Available in duo-pack cartridge for easy and best processing.Toughened system providing very high shear and peel strengthExcellent environmental resistanceTechnical specificationsThe following technical information and data should be considered representative or typical only and should not be used for specification purpose. General Properties Part B Part A Color White or Black Off-white Base Modified epoxy Modified amine Consistency Thixotropic paste Thixotropic paste Density 1.04 g / cm³ 1.03 g / cm³ Solids 100 % 100 % Viscosity 250 Pas 75 Pas Mix ratio by weight (by volume) 100 : 50 wt. (100 : 50 vol.) 100 : 50 wt. (100 : 50 vol.) Work life and open time at 23 ± 2 °C > 120 minutes > 120 minutes Handling strength 4 hours 4 hours Full cure cycle 7 days at room temperature 7 days at room temperatureHazard Information (CLP)Signal word: Danger (Part A) / Warning (Part B)Hazard Statements (H phrases)H314: Causes severe skin burns and eye damage. (Part A)H315: Causes skin irritation. (Part B)H317: May cause an allergic skin reaction. (Both Parts)H319: Causes serious eye irritation. (Part B)H336: May cause drowsiness or dizziness. (Part A)H410: Very toxic to aquatic life with long lasting effects. (Part A)H411: Toxic to aquatic life with long lasting effects. (Part B)Safety Instructions (P phrases)Prevention:P260B: Do not breathe dust. (Part A)P273: Avoid release to the environment. (Both Parts)P280B: Wear protective gloves/eye protection/face protection. (Part A)P280E: Wear protective gloves. (Part B)Response:P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. (Part A)P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (Both Parts)P310: Immediately call a POISON CENTER or doctor/physician. (Part A)P333 + P313: If skin irritation or rash occurs: Get medical advice/attention. (Part B)P391: Collect spillage. (Part B)Additional Hazard InformationEUH212: Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. (Both Parts)Other HazardsIndividuals sensitized to amines may experience cross-sensitization with other amines. (Part A)This material does not contain substances that are considered PBT or vPvB. (Both Parts)×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds