3M Scotch-Weld EC-9323 Two Part Structural Adhesive 20L kit

3M™ Scotch-Weld™ Structural Epoxy Adhesive EC-9323 B/A is a two component epoxy paste adhesive which cures at room temperature or with mild heat to form a tough, impact resistant  structural bond. It has an excellent adhesion to a wide variety of substrates such as metals, glass, ceramics and plastics, incl. GFRP and CFRP. Once cured it provides extremely high shear and peel strength over a wide temperature range, with outstanding resistance to harsh environments and chemicals commonly encountered in aerospace applications.Toughened system providing extremely high shear and peel strengthWide service temperature rangeOutstanding environmental resistanceFull room temperature processingVolume: 20 LTechnical SpecificationsGeneral propertiesBasisHardener Colorwhitered orange – purple Basemodified epoxymodified amine Consistencythixotropic pasteslight gel Viscosity 26°C700 Pas18 Pas Density1,18 g/cm31, 06 g/cm3 Solids100 %100 % Mix ratio by volume100:30100:30 Mix ratio by weight100:27100:27 Work life / Open Time at 23 ± 2 °C150 minutes / 20 minutes150 minutes / 20 minutes Handling strength4-5 hours4-5 hours Full cure cycle14 days at room temperature14 days at room temperature PackagingCans and pailsCans and pailsHazards Identification (CLP)Signal word: Danger.Hazard Statements (H-statements)Part A: H314 Causes severe skin burns and eye damage.Part A: H317 May cause an allergic skin reaction.Part B: H315 Causes skin irritation.Part B: H319 Causes serious eye irritation.Part B: H317 May cause an allergic skin reaction.Part B: H411 Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-statements)Prevention:Part A: P260B Do not breathe dust.Part A: P280D Wear protective gloves/protective clothing/eye protection/face protection.Part B: P273 Avoid release to the environment.Part B: P280E Wear protective gloves.Response:Part A: P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.Part A: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.Part A: P310 Immediately call a POISON CENTER or doctor/physician.Part A: P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.Part B: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.Part B: P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.Part B: P391 Collect spillage.Additional Labelling (EUH Statements)None.Storage and DisposalNo specific regulations known.Other Relevant InformationThis material contains no substances identified as PBT or vPvB.Part A: Contains 2% components of unknown aquatic toxicity.Part B: Contains 18% components of unknown aquatic toxicity. Information on product safety (Manufacturer, Contact)3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, , www.3m.com/msds