Castrol Aircol CM 68 Air compressor oil VDL 20L canister

Oil Lubricant for the Crankcase and Cylinders of Reciprocating Air CompressorsCastrol Aircol CM 68 Air compressor oil type VDL (ISO VG 68) is based upon highly refined mineral oil, enhanced with additive technology providing excellent thermal and oxidative stability and good load carrying capacity, compared to other products in the same class.Aircol CM 68 air compressor oils are ISO 6743-3 classified as follows:DAA and DAB for reciprocating (piston) and drip freed rotary air compressorsDAG and DAH for oil-flooded rotary screw air compressorsApplicationFor the lubrication of reciprocating and rotary screw air compressors (formulated without zinc additives [ashless oils])Aircol CM 68 is suitable for lubricating the crankcase and cylinders of reciprocating compressorsFor reciprocating air compressors having air discharge temperatures up to 220°CFor both oil flooded and oil injected rotary screw air compressors operating continuously at air discharge temperatures up to 90ºC, the product has been designed to meet service drain intervals of up to 4000 hours. For intermittent or continuous operation with air discharge temperatures above 90ºC, the manufacturers’ standard oil change periods should be used.The high FZG load carrying is designed also to meet geared air compressor units requirementsAircol CM range is fully compatible with Castrol Aircol PD and MR rangesSpecifications / ApprovalsDIN 51506 (VDL)ISO 6743-3Specific viscosity grades within the Aircol CM air compressor oil range, meet the requirements of:Sauer Compressors, Hatlapa (Types L,V, VA and W)Yanmar, Sanwa, Matsubara, Tanabe, TeikukoDongwha Pnetec, BumhanBurckhardt (VSB 1001132 E01 02)AdvantagesGood water separation characteristics allows condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator elementFully inhibited against corrosion which enables protection even when operating under humid conditionsGood thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to a longer operating life (up to 4000 hours)Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costsExcellent coalescing properties mean little carry over of oil in the air streamHigh load carrying to meet requirements of geared compressor unitsTechnical specificationsAppearance: Clear & BrightISO Viscosity Grade: 68Density @ 15°C / 59°F: 862Kinematic Viscosity @ 40°C / 104°F: 68.0 mm²/sKinematic Viscosity @ 100°C / 212°F: 9.0mm²/sViscosity Index: 100Pour Point: -36/-33°C/°FFlash Point – open cup method: 240 / 464 °C/°FSize: 20 LiterPackaging type: canisterAlso available in: 208l barrelGLIS number: 15D9A8MSDS number: 470130 Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com