Castrol Braycote 2115-2 – 800g cartridge

High-temperature grease for oven conveyor bearings up to 280ºC / 536ºF – NLGI Grade 2Castrol Braycote 2115-2 (previously called Molub-Alloy™ 2115) is a thermally stable, high temperature synthetic bearing lubricant. It contains lubricating solids for good wear protection and is designed to greatly extend service life and relubrication intervals in high temperature bearings, compared to conventional greases. ApplicationPrimarily developed for extended service in oven conveyor bearingsRecommended for bearings operating in paint drying ovens, textile tentering frames, and similar applications where minimum reapplication and dripfree performance is requiredCan be used in continuous service at 250°C / 482°F and may be exposed to intermittent temperatures up to 280ºC / 536ºF. Forced draft ventilation should be used at temperatures exceeding 250ºC / 482ºFCan be applied manually or with automatic dispensing equipmentFeatures / AdvantagesThermally and chemically stable – high resistance to oxidation at high temperatures extends relubrication intervals without undue risk of under lubrication, lubrication starvation or an increase in power drawVirtually inert below 300ºC / 572ºF – resists the thickening and hardening that is typical of petroleum greases in high temperature serviceEven at high temperatures (refer the Application section), Braycote 2115 is resistant to most non-fluorinated solvents and most chemicals, including strong acids, alkalis and oxidising agentsLow volatility – does not volatilise readily at high temperatures and/or when exposed to high vacuumFormulated from an advanced synthetic fluid and thickened with a temperature stable non-soap baseTechnical specificationsAppearance: WhiteThickener type: PTFEBase oil: PFPEConsistency NLGI Grade: 2Density @ 20 °C/68 °F, IP 530, kg/m³: 1990Unworked Penetration (@ 25 °C/77 °F), 0.1 mm: 265-295Base Oil Viscosity @ 40 °C/104 °F, mm²/s: 510Base Oil Viscosity @ 100 °C/212 °F, mm²/s: 46Base Oil Viscosity @ 200 °C/392 °F, mm²/s: 6.5Copper Corrosion (24 hrs,100 °C/212 °F): 1BEvaporation Loss (24 hrs @ 232 °C/450 °F), %wt: 1.0Pour Point Base Oil, °C/°F: -20/-4Size: 800gPackaging type: cartridgeGLIS Nr. – 15D683MSDS Code – 468679Additional InformationBraycote 2115 should not be mixed with other greases or oils. Please contact your local Technical Services team for further information.Braycote 2115 has a very low order of toxicity at room temperature with no significant irritation to skin or eyes. Above +250 °C / 482ºF, the use of forced draft ventilation is strongly recommended due to possible decomposition causing toxic and/or acidic vapours.Due to Braycote 2115’s excellent resistance to ordinary cleaners and solvents, some industrial cleaners (fluorinated solvents) can provide a more effective clean-up solution Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com