Castrol Molub-Alloy OG 936 SF HEAVY Open gear compound 300g

Castrol ​Molub-Alloy™ OG 936 SF Heavy Open gear compounds (solvent free) NLGI 0Castrol Molub-Alloy™ OG 936 SF Heavy (previously called Molub-Alloy 936 SF Heavy) is an open gear lubricant developed specifically for use on heavy-duty equipment in mining and industrial service. Molub-Alloy OG 936 SF Heavy is compounded to give maximum protection to gears and slides on large draglines and shovels while minimizing potential pollutants to the environment.ApplicationMolub-Alloy OG 936 SF Heavy is suitable for use on all types of open gears, racks and pinions and sliding or skidding applications such as draglines and shovels. It can be applied either manually or by heavy duty automatic systems.This product is used extensively in mining, construction, onshore drilling operations and on offshore installations, facilitating effective lubrication and protection on:Rack and pinion jacking mechanismsCantilever skidding systemsMooring winch open gearing and slidesFPSO offloading systemsCrane slew ring & pinionExposed threads on penstock valvesHeavy-duty top dressing for the ultimate protection of wire ropesSpecifications / ApprovalsBucyrus International SD 4713 specification (CAT) and Komatsuspecifications for Open Gear Lubricants.AdvantagesFormulated to address environmental concerns – it is free of solvents, lead, antimony and BariumForms a tough durable film with a cushioning effect, even under extreme pressures and at very slow speedsThe film resists erosion from rain or sleet, and resists peeling in dusty environmentsThe film resists destruction by contaminating oils and greases migrating from nearby mechanismsTechnical specificationsDensity @ 20°C / 59°F kg/m³: 1002Consistency NLGI Grade: 0Worked Penetration (60 strokes @ 25°C / 77°F) 0.1 mm: 345-360Brookfield Viscosity cP: 144,000Base Oil Viscosity @ 40°C / 104°F mm²/s:  2030Base Oil Viscosity @ 100°C / 212°F mm²/s: 57Rust Test (distilled water): PassCopper Corrosion (24 hrs,100°C / 212°F) Rating: 1bVolume: 300gAlso available as: 400ml spray can, 55kg barrel, 190kg barrelGLIS number: 15B1D3MSDS code: 468617Additional InformationMolub-Alloy OG 936 SF Heavy is not intended for general use in bushings and bearings except in slow moving, heavilyloaded applications.Castrol Molub Alloy OG 936 SF HEAVY, Castrol Molub-Alloy OG936 SF HEAVY, Castrol Molub Alloy OG-936 SF HEAVYHazard Information (CLP)Hazard pictogram(s): Exclamation markSignal word: WarningHazard statements (H-phrases)H317 – May cause an allergic skin reaction.Prevention (P-phrases)P280 – Wear protective gloves.P261 – Avoid breathing vapor.P272 – Contaminated work clothing should not be allowed out of the workplace.ResponseP302 + P352 + P362 + P364 – IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse.P333 + P313 – If skin irritation or rash occurs: Get medical attention.Storage and DisposalNot applicable (storage).P501 – Dispose of contents and container in accordance with all local, regional, national and international regulations.Additional Relevant InformationMay cause skin defatting.Injection injuries under high pressure are a serious medical emergency (see section 4).23212678 Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com