Castrol Molub-Alloy Paste PL Assembly paste MoS2 black 1kg can

Castrol MOLUB-ALLOY™ PASTE PL (previously named Optimol™ Paste PL) is a black assembly paste with MoS2 especially suited for highly loaded sliding surfaces as well as for base and thin-film lubrication at high pressures and temperatures.For larger surfaces and lubricating points with difficult access such as bore holes, threads and gear rims we recommend the use of .ApplicationFor screw connections, press and snug fits at high temperatures up to + 600°C/+ 1112°FFor sliding bearings, bushes and toothed wheels.On drive trains in the automotive industry.For base lubrication of slide ways, guides and joints.For good separation of tool and work piece during hot shaping of metals.Temperature application range: – 30°C/- 22°F up to about + 450°C/+ 842°F (in case of reduced air supply up to +600°C/+ 1112°F)AdvantagesOPTITEC™ – MOLUB-ALLOY technology. Wide range of applications.Immediate lubricating effect. Easy spray application.Economical in use. Thermally stable.Excellent emergency running properties due to especially selected solid lubricants. Maximum load carrying capacity.Extremely low coefficient of friction. Good corrosion protection.Prevents fretting corrosion. Good adhesion and separation. Prevents stick-slip.Technical specificationsColour: Grey-BlackBase: Grease-like carrier/MoS2 and solid lubricants with synergetic effect/mineral oilWorked Penetration (60 strokes @ 25°C / 77°F) 0.1 mm 265 – 295Density @ 20°C / 68°F Inhouse method kg/m³: 1500Base Oil Viscosity @ 40°C / 104°F mm²/s: 94.0Erichsen Screw test, total friction: 0.07Volume: 1kg canAlso available as: 400ml spray can, 7kg canGLIS number: 15B6B8 or 15FBECMSDS code: 468642Castrol Molub Alloy Paste PL  Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com