Castrol Tribol GR 100-0 PD High performance bearing grease NLGI-0 18kg

Castrol Tribol™ GR 100-0 PD (previously called Longtime™ PD) is a lithium based high performance bearing grease (NLGI grade 0) containing highly refined mineral oils, enhanced with the MicroFlux Trans (MFT) additive system.ApplicationTribol GR 100-0 PD and 100-00 PD can be used as semi-fluid grease lubricants in gears such as flange, drum-type and worm gears. For long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings.Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates.AdvantagesHigh load bearing capacity – extends the operating period under high loads leading to optimum wear protectionSuperior lubrication and surface smoothing effects due to MFT can reduce failures, leading to less downtime and repair work. PD technology can prolong the life of damaged componentsEstablishment of a protective layer of MFT – this additive system can effectively increase the load bearing area, reducing unit pressures, operating temperatures and wear, increasing service life of both parts and lubricantImproved bearing surfaces for longer service life result from the ‘running in’ effect of MFTExtremely low coefficients of friction – generating energy savings and reduced noise levelsMulti-functional – Tribol GR 100-0 PD and 100-00 PD are highly recommended for anti-friction bearings with grease reservoir and for leaky gearboxes.Easily pumpable in central lubrication systems – does not channel on gears running at high speeds when using 100-0 PD 0 and 100-00 PDTechnical specifications Appearance: Brown Thickener type: Lithium Base oil:  Mineral oil Consistency NLGI Grade: 0 Density @ 20 °C/68 °F  kg/m³: 890 Worked Penetration (60 strokes @ 25 °C/77 °F): 355 – 385 Base Oil Viscosity @ 40 °C/104 °F: 130 Flow pressure @ -35 °C/-31 °F  hPa: 1000Volume: 18kg bucketAlso available in: GLIS number: 15C83DMSDS code: 468681Product descriptionCastrol Tribol™ GR 100 PD (previously called Longtime™ PD) is a range of lithium based greases containing highlyrefined mineral oils, enhanced with the MicroFlux Trans (MFT) additive system.The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even underextremes of pressure, vibration, shock loads, at high or low speeds or varying micro-smoothing of the friction surfaces.Under severe load, components of the MFT additive combination are activated, initiating an improvement of surfacefriction characteristics through plastic deformation. The products of that organic reation become a component of thetribopolymer system.Unlike the case with conventional lubricants, the tribopolymers formed by MFT are long-chained compounds withexcellent lubricity and adhesion. This means that the load carrying area is improved and a hydrodynamic lubrication filmis easier to maintain. This unique physio-chemical reaction achieves a non-sacrificial micro-smoothing of the frictionsurfaces.Castrol Tribol GR 100 0Hazard information (CLP)Signal word: WarningHazard statements (H-codes)H319: Causes serious eye irritation.H317: May cause an allergic skin reaction.Precautionary statements (P-codes)Prevention:P280: Wear eye or face protection.P261: Avoid breathing vapour.P272: Contaminated work clothing should not be allowed out of the workplace.Response:P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P333 + P313: If skin irritation or rash occurs: Get medical attention.P302 + P352 + P362+P364: IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse.Disposal:P501: Dispose of contents and container in accordance with all local, regional, national and international regulations.Additional relevant informationDefatting to the skin.Hazardous ingredients: Reaction product of ammonium molybdate and C12-C24-diethoxylated alkylamine (1:5-1:3), Isodecyl diphenyl phosphite.Note: High-pressure applications can cause severe injuries. Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com