Elastosil N2189 Silicone Rubber RTV-1 black 310ml cartridge

Moisture curing silicone rubber (RTV-1) heat resistance up to 200 °C | ELASTOSIL® N 2189ELASTOSIL® N 2189 is a non-slump, one-part Alkoxy-cure silicone sealant, which cures at room temperature under influence of moisture. ELASTOSIL® N 2189 shows primerless adhesion to many substrates, in particular to cast magnesium. It exhibits good resisitance against mineral oils. ApplicationsAppliances IndustryAutomotive, Aerospace & RailwayBonding & SealingElectrical ComponentsFormed-In-Place-Gaskets (Wet Type)Industrial AssemblyReady-to-Use Silicone Sealants – General ApplicationsCharacteristicsFlame retardant (meets UL 94 V-0)Adhesion on cast magnesiumRecommended service temperature from -45 °C to 200 °C1-component systemHeat resistantNeutral-cureNon-slumpOil resistantOne-componentTechnical specificationsUncured Color black Density 23 °C DIN EN ISO 1183-1 A 1.20 g/cm³ Viscosity, dynamic D = 0,5 1/s 25 °C DIN EN ISO 3219 250000 mPa·s  Viscosity, dynamic D = 25 1/s 25 °C DIN EN ISO 3219 150000 mPa·s  Skin formation time⁽¹⁾ 15 min Extrusion rate – mass flow⁽²⁾ internal method 10 g/10s Cured Color black Density 23 °C DIN EN ISO 1183-1 A 1.23 g/cm³ Hardness Shore A  DIN ISO 48-4 45 Tensile strength⁽¹⁾ ISO 37 1.5 N/mm² Elongation at break⁽²⁾ ISO 37 200 % Curing Conditions: 14 days at 23 °C and 50 % rel. humidity, 2 mm sheet, no post-curingStorageThe ‘Best use before end’ date of each batch is shown on the product label.Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.Elastosil N-2189, Elastosil N 2189 Black Information on product safety (Manufacturer, Contact)Wacker Chemie AG, Gisela-Stein-Strasse 1, 81671 München, GERMANY, +49 89 6279-0, , www.wacker.com