Fuchs Gleitmo 627 Dry solid lubricant film 25 Kg Hobbock

GLEITMO 627 by Fuchs Lubritech GmbH is a suspension of GLEITMO White Solid Film Lubricants in water. It is being used widely as the friction stabilizers for reducing and stabilizing the coefficients of friction on fasteners. To optimize the lubrication properties GLEITMO 627 contains a special selected PTFE.It can also be applied to effectively minimize “thread galling” and “cold welding” during tightening of stainless steel and other alloy fasteners. Therefore, many reputable manufacturers of fasteners are using GLEITMO 615 as the solution to prevent thread seizing.Field of applicationGLEITMO 627 has been developed for lubrication of bulk parts such as rivets, self-tapping and self-forming screws, and other parts with high requirements to the lubrication properties.Performance featuresTemperature range of the dry lubricating film: -40 / +110 °CTo achieve low friction coefficients/grooving torques for bolted connections, with a low variationTo avoid seizures of stainless-steel connectionsProvides a transparent, touch-proof and abrasion-resistant lubricating filmIs suitable for mass partsSaves assembly time and is particularly suited for automatic systemsIs clean and non-greasingSticks well on a lot of material surfacesContains a UV additive for a UV coating inspection (340 – 380 nm)Technical specificationsTemperature range (dry film): -40°C to +110°CpH value: 5.0 – 6.0Screw test friction coefficient: 0.08μ​Method of applicationDepending on the requirements, GLEITMO 627 can be diluted in water (at least drinking water quality). As a rule, GLEITMO 627 is used at dilution ratios of 1 : 3 (for centrifuge coating processes; stringent requirements) up to app. 1 : 7 (for dipping). In individual cases dilution ratios of 1 : 1 to 1 : 2 are used to achieve minimum grooving torques. The parts to be coated must be free of grease. Drums and centrifuges commonly used in the galvanising industry have proved to be convenient in case of large coating quantities. After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approxi-mately 80 °C).NoteProtect against freezing! In closed original containers, at room temperature, storable up to 24 months.IndustriesAutomotiveMachinery, equipmentSteel, metalsHazard Information (CLP)Signal Word: WarningHazard Statements (H-Codes)H226: Flammable liquid and vapour.H319: Causes serious eye irritation.Precautionary Statements (P-Codes)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P262: Do not get in eyes, on skin, or on clothing. Information on product safety (Manufacturer, Contact)FUCHS LUBRICANTS GERMANY GmbH, Friesenheimer Str. 19, 68169 Mannheim, GERMANY, +49 621 3701-0, , www.fuchs.com