Klüber CENTOPLEX 3 Multi-purpose grease for bearings 1kg can

CENTOPLEX 3 Multi-purpose greases for rolling and plain bearings | N° 020060CENTOPLEX 3 is a multi-purpose grease based on oxidation-resistant mineral oils and lithium soap.They meet the rolling bearing grease requirements according to DIN 51825 K.Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication.The more viscous CENTOPLEX of NLGI grade 3 is to be used for bearings with inclined or vertical shafts or insufficiently sealed bearings.Temperature range: -30°C to +130°C Volume: 1 kg can Also available in: 400g cartrigde, 25kg bucket, 180kg drumBenefits for your applicationLong-term lubrication of simple applicationsMulti-purpose greasesApplicationCENTOPLEX 3 is used for rolling and plain bearings. When used for long-term lubrication, temperatures at the friction point should be < 70 °C.The greases can be used up to their maximum service temperature of 130 °C provided fresh grease is constantly fed to the friction point. We would be pleased to provide more detailed information on relubrication intervals and quantities.CENTOPLEX 3 is suitable for the lubrication of toothed and worm gears, guides and threaded spindles.Application notesCENTOPLEX  3 can be applied by grease gun, brush or spatula. If a fully-automatic lubrication system is available for relubrication, CENTOPLEX 2 should be used.For initial lubrication CENTOPLEX 2 or CENTOPLEX 3 can be used depending on the bearing seal.Technical specifications Article number020060 Chemical composition, type of oil mineral oil Chemical composition, thickener lithium soap Lower service temperature -30 °C / -22 °F Upper service temperature 130 °C / 266 °F Colour space brown Appearance almost transparent Texture fibrous, homogeneous Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 220 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 250 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 100 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 10 mm²/s Drop point, DIN ISO 2176, IP 396 >= 190 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com