Klüber ISOFLEX LDS 18 Special A Long-term lubricating grease 400g

Dynamically light, long-term lubricating greaseISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosionContent: Cartridge 400 gAvailable in Tube 45 g, Cartridge 400 g, Can 1 kg, Bucket 25 kgBenefits for your applicationLong service life due to good corrosion protection as well as ageing and oxidation stability, hence cost savingsTried-and-tested for many years, especially at high speeds and low temperaturesLow heating-up of bearings due to low lubricant friction leading to longer service livesApplicationISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipmentTechnical specificationsArticle number4013Chemical composition, thickenerlithium soapChemical composition, type of oilmineral oilChemical composition, type of oilester oilLower service temperature-50 °C / -58 °FUpper service temperature120 °C / 248 °FColour spaceyellowTexturehomogeneousTextureshort-fibredDensity at 20 °Capprox. 0,88 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 15 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox.  3,5 mm²/sShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value4 000 mPasShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value2 000 mPasCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water0 corrosion degreeSpeed factor (n x dm)approx.  1 000 000 mm/minLow-temperature torque, IP 186, – 60 °C, start<= 1 000 mNmLow-temperature torque, IP 186, -60 °C, running<= 100 mNmDrop point, DIN ISO 2176, IP 396>= 190 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com