Klüber ISOFLEX NBU 15 High speed spindle bearing grease 1kg

ISOFLEX NBU 15 is a high-speed grease with a good pressure absorption capacity.It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water, media and oxidation.Benefits for your application:Tried and tested over many years especially in high-speed applicationsLonger component life due to optimized wear protection and good pressure absorption capacityExcellent resistance to water and media as well as above-average anticorrosive additives protect bearings against premature failure, thus helping to minimize repair costsLow intrinsic bearing heat due to low lubricant friction enabling longer service lifeUninterrupted machine operation due to good pumpability and metering in customary centralized lubricating systemsContent: 1kg canAvailable in 50g tube, 400g cartridge, 1kg can, 25kg bucketApplication:ISOFLEX NBU 15 is primarily used for spindle bearings and highspeed plain bearings, e.g. in machine tools and textile machines. Further applications are in threaded spindles, ball screws operating under high loads, running gear bearings, as a longterm grease in cableway bearings and in precision engineering. It may also be used for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical valve actuators).Application notes:The lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the many elastomer and plastic compositions, we recommend checking the grease’s compatibility prior to series application with elastomers or plastics.Product data: Lower service temperature -40°C / -40°F Upper service temperature 130 °C / 266 °F Color space beige Texture homogeneous Texture shortfibred Density at 20 °C approx. 0.99 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Shear viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 4 000 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 8 000 mPas Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 21 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 4.5 mm²/s Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Drop point, DIN ISO 2176 >= 220 °C Speed factor (n x dm) approx. 1 600 000 mm/min Minimum shelf life from the date of manufacture in a dry, frostfree place and in the unopened original container, approx. 36 months Hazard Information (CLP)Signal word: WarningHazard statements (H-phrases)H302 + H332: Harmful if swallowed or inhaled.Precautionary statements (P-phrases)Prevention:P264: Wash skin thoroughly after handling.P270: Do not eat, drink or smoke when using this product.P271: Use only outdoors or in a well-ventilated area.Response:P301 + P312 + P330: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.Hazard-determining component(s) for labelingBarium salts Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com