Klüber ISOFLEX SUPER LDS 18 High-speed and smooth-running grease 1kg

Klüber ISOFLEX SUPER LDS 18 | n° 004024ISOFLEX SUPER LDS 18 is a low-noise, high-speed grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. It protects against corrosion and is resistant to ageing and oxidation.Content: 1kg canAvailable in 45g tube, 370g cartridge, 1kg can , 25kg bucketBenefits for your applicationLow running torque enables energy savings, particularly at low temperaturesSmooth-running grease for high performanceLong service life due to good corrosion protection as well as ageing and oxidation stability, hence cost savings possibleLow heating-up of bearings due to low lubricant friction leading to longer service livesApplicationISOFLEX SUPER LDS 18 is suitable for plain and rolling bearings, small, miniature and precision bearings, for precision mechanical and optical equipment and low-temperature applications.It can also be used as an anti-corrosion and anti-wear lubricant in electrical contacts.Properly applied, ISOFLEX SUPER LDS 18 protects against corrosion and oxidation, improves sliding properties and reduces wear, e.g. in sliding contacts and potentiometers.Product data Article number 0040240037 Chemical composition, type of oil mineral oil Chemical composition, type of oil ester oil Chemical composition, thickener lithium soap Lower service temperature -50 °C / -58 °F Upper service temperature 120 °C / 248 °F Color space yellow Texture short-fibred Texture homogeneous Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 15.5 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 3.5 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 2 000 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 3 400 mPas Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water 0 corrosion degree Flow pressure of lubricating greases, DIN 51805-2, test temperature: -50 °C <= 1 400 mbar Drop point, DIN ISO 2176, IP 396 >= 190 °C Speed factor (n x dm) 1 000 000 mm/min Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 monthsKlüber ISOFLEX SUPER LDS 18  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com