Klüber ISOFLEX SUPER LDS 18 High-speed and smooth-running grease 25kg

High-speed and smooth-running grease.ISOFLEX SUPER LDS 18 is a low-noise, high-speed grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. It protects against corrosion and is resistant to ageing and oxidation.Content: 25kg bucketAvailable in 45g tube, 370g cartridge, 1kg can , 25kg bucketBenefits for your application:Low running torque enables energy savings, particularly at low temperaturesSmooth-running grease for high performanceLong service life due to good corrosion protection as well as ageing and oxidation stability, hence cost savings possibleLow heating-up of bearings due to low lubricant friction leading to longer service lives Application:ISOFLEX SUPER LDS 18 is suitable for plain and rolling bearings, small, miniature and precision bearings, for precision mechanical and optical equipment and low-temperature applications.It can also be used as an anti-corrosion and anti-wear lubricant in electrical contacts.Properly applied, ISOFLEX SUPER LDS 18 protects against corrosion and oxidation, improves sliding properties and reduces wear, e.g. in sliding contacts and potentiometers.Product data: Article number 004024 Chemical composition, type of oil mineral oil Chemical composition, type of oil ester oil Chemical composition, thickener lithium soap Lower service temperature -50 °C / -58 °F Upper service temperature 120 °C / 248 °F Color space yellow Texture short-fibred Texture homogeneous Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 15.5 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 3.5 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 2 000 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 3 400 mPas Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water 0 corrosion degree Flow pressure of lubricating greases, DIN 51805-2, test temperature: -50 °C <= 1 400 mbar Drop point, DIN ISO 2176, IP 396 >= 190 °C Speed factor (n x dm) 1 000 000 mm/min Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 months   Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com