Klüber ISOFLEX TEL/3000 ALTEMP Sliding grease 1kg can

ISOFLEX TEL/3000 ALTEMP Sliding grease with emergency lubricating properties | N° 005060Operators of precision-engineering and textile industry applications often have different requirements than in other industries.Precision engineering often requires greases with low friction coefficients and starting torques that provide emergency lubrication. Good low-temperature characteristics are also a frequent requirement.Temperature range: -45°C to +60°C Volume:  1 kg canAlso available in:  25 kg bucketBenefits for your applicationSynthetic product for low friction and starting torqueLonger component lifetime with optimised wear protectionGood corrosion protection preventing premature component failureLow internal friction of the lubricant for low internally generated heat in the bearing and increased service lifeApplicationsThe special product properties of ISOFLEX TEL 3000 ALTEMP facilitate its use in precision engineering and the textile industry.Typical applications of ISOFLEX TEL 3000 ALTEMP include:Rolling and plain bearings used in precision engineering at normal and low temperaturesZig-zag winding guides in spool and twisting machinesYarn guide rails in spool and twisting machinesApplication notesISOFLEX TEL 3000 ALTEMP can be applied to the clean lubrication point by brush, spatula or similar application equipment. The friction point can be cleaned with commercially available cleaning agents if necessary.Technical specifications Lower service temperature -45 °C / -49 °F Upper service temperature 60 °C / 140 °F Texture homogeneous Texture short-fibred Colour space beige Density at 20 °C approx. 0.95 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 280 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 310 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 19 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 4.5 mm²/sHazard Statements (CLP)Signal word: DangerHazard Statements (H-statements)H411: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-statements)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage.Other Relevant InformationThis substance/mixture contains no components in concentrations of 0.1% or higher that are classified as persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).Does not contain any components with endocrine-disrupting properties according to REACH Article 57(f) or relevant regulations. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com