Klüber ISOFLEX TOPAS NCA 52 Synthetic long-term grease 50g tube

Synthetic long-term greaseISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations.The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media.The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection.Content: 40g tubeAvailable in 40g tube, 400g cartridge, 1kg can, 25kg bucketBenefits for your application:Reduced maintenance due to long-term or lifetime lubricationReliable operation and many years of practical experienceWide application range even with high loadsLow starting and running torques particularly at low temperatures ensure high efficiency and energy savingsLonger component life due to good wear protectionApplication:ISOFLEX TOPAS NCA 52 is used for high-speed rolling and plain bearings as well as for small gears subject to high loads. Due to the good compatibility with plastics the grease is suitable for plastic-plastic or metal-plastic material combinations. The low starting torque and the good wear protection make it an ideal grease for the long-term lubrication of linear motion guides and ball screws, e.g. in handling and automation technology.ISOFLEX TOPAS NCA 52 can also be used for many automobile applications, e.g. for the lifetime lubrication of seat rails. It is suitable for components which have to be lubricated prior to dip painting and the drying process at peak temperatures of 180 °C as the lubricant remains at the friction point and provides reliable lubrication even after short thermal treatment.Product data:Article number4179Chemical composition, type of oilsynthetic hydrocarbon oilChemical composition, thickenerspecial calcium soapLower service temperature-50 °C / -58 °FUpper service temperature130 °C / 266 °FColour spacebeigeDensity at 20 °Capprox. 0,89 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 31 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 5,9 mm²/sShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value2 800 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value5 200 mPasCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeCopper corrosion, DIN 51811, (lubricating grease), 24h/120 °C1 - 120 corrosion degreeFlow pressure of lubricating greases, DIN 51805, test temperature: -40 °C<= 1 400 mbarSpeed factor (n x dm)approx. 1 000 000 mm/minDrop point, DIN ISO 2176, IP 396>= 220 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com