Klüber Klüberpaste HEL 46-450 High-temperature screw paste 70g tube

Klüberpaste HEL 46-450 High-temperature screw paste | N° 089032Klüberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.Klüberpaste HEL 46-450 is suitable for a temperature range between -40 °C and 1000 °C. In the normal temperature range (i.e. below 200 °C) it shows good anticorrosion behaviour and good water resistance. Above 200 °C it acts as a dry lubricant.Temperature range: -40°C to +1000°CVolume:  70g tubeAlso available in: 750g can, 600g cartridge, 30kg bucketBenefits for your applicationReliable screw connection ensured by constant and sufficient preload forceEasy release also after long time at high temperatureApproved in Ford tox. No. 138624ApplicationScrew paste for conventional and high-alloy steels (Cr-Ni steels) up to 1000 °C.Lubricating and assembly paste for connections in hot air ducts (e.g. automotive exhaust systems).For connecting elements in turbochargers and compressors.Application notesIt is important to clean and degrease the contact surfaces thoroughly before applying Klüberpaste HEL 46-450.A thin layer of paste is then applied by brush, leather cloth or plastic sponge.Klüberpaste HEL 46-450 spreads easily over the entire surface and thus prevents excess lubrication.Technical Specifications Lower service temperature -40 °C / -40 °F Upper service temperature 1000 °C Colour space black Density at 20 °C approx. 1.43 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 325 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mm Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C <= 600 mbar Drop point, DIN ISO 2176, IP 396 >= 250 °C Four-ball tester, welding load, DIN 51350 pt. 04 >= 5 000 NHazard Information (CLP)Signal word: WarningHazard Statements (H-Codes)H317: May cause an allergic skin reaction.H411: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-Codes)Prevention:P272: Contaminated work clothing should not be allowed out of the workplace.P273: Avoid release to the environment.P280: Wear protective gloves.Response:P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P362 + P364: Take off contaminated clothing and wash it before reuse.P391: Collect spillage.Hazard-determining component(s)4-Ethyl-2-(8-heptadecenyl)-2-oxazolin-4-methanolOther HazardsThis substance/mixture contains no components at concentrations of 0.1 % or more classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB). Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com