Klüber Klübertop TP 36-1300 N Two-component bonded coating 1l bottle

Klübertop TP 36-1300 N Water-miscible two-component bonded coating for sealing rings and coloured elastomers Komp. A | N° 099221Klübertop TP 36-1300 N A/B is a colourless two-component bonded coating for elastomers and thermoplastics. It has a low friction coefficient and a high resistance to wear as well as chemical stability.As Klübertop TP 36-1300 N A/B forms a nearly colourless dry film, it is particularly suitable for coloured seals and O-rings where increased operational reliability and colour fastness are equally important.Komp. A,  as component B use Klübertop TH 03.Temperature range: -40°C to +100°C Volume: 1l bottleAlso available in: 15l bucketBenefits for your applicationSoft, visually appealing surfaceReduction of assembly forcesCan be colouredHigh chemical stabilityHigh elasticityContains UV indicator (excitation at 300 – 400 nm)ApplicationsCoating of coloured TPE profiles, molded partsReduction of assembly forces for O-ringsApplication notesKlübertop TP 36-1300 N A/B can be applied by spraying or by brush.Spraying:Feed pressure: approx. 2 barNozzle diameter: 0.3 to 0.5 mmRecommended coating thickness: approx. 5–10 µmEnsure that only oil and water-free compressed air is used.As component B use Klübertop TH 03.In individual cases, the use of a primer or plasma treatment will improve adhesion.Please contact us for further information on how to reduce assembly forces for O-rings.Protect from frost and heat.Technical specifications Lower service temperature -40 °C / -40 °F Upper service temperature 100 °C / 212 °F upper service temperatur (short-time) 180 °C Density, DIN EN ISO 2811, at 20 °C approx. 1.08 g/cm³ Runout time, DIN EN ISO 2431, with flow cups, 4 mm nozzle approx. 21 s Mixing ratio of components (standard mixture) 100:6.5 Drying time, at approx. 20 °C, completely hardened approx. 24 h Drying time, at approx. 100 °C, dry to the touch approx. 5 min Yield with a tribo-film thickness of 10 micrometer approx. 24 m²/l Recommended layer thickness, tribological coating 5 – 10 µm Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com