Klüber Microlube GB 0 Universal high-performance lubricant 1kg tin

Universal high-performance lubricant.MICROLUBE GB 0 is a special mineral oil based lubricant. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, and shows a good wetting behaviour and water resistance.Content: 1kg canAvailable in 400g cartridge , 1kg can, 25kg bucket, 180kg drumBenefits for your application:Universal high-performance lubricantHigh pressure absorption capacityGood wear protectionGood anticorrosion behaviourPumpable through centralized systemsApplication:MICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings.Application notes:MICROLUBE GB 0 is applied by brush, spatula, grease gun or centralized lubrication system. Immersion lubrication of gears is possible up to a peripheral speed of approx. 3 m/s or via forcedfeed lubrication.Product data: Article number 020232 Texture homogeneous Color space red Appearance transparent Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 355 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 385 x 0.1 mm Base oil viscosity at 40 °C, calculated value approx. 590 mm²/s Base oil viscosity at 100 °C, calculated value approx. 31.5 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer approx. 3 000 mPas Drop point, DIN ISO 2176, IP 396 > 180 °C Flow pressure of lubricating greases, DIN 51805, test temperature: -25 °C < 1 400 mbar FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage >= 12 Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 months Hazard Statements (CLP)Signal word: Warning.Hazard Statements (H-Statements)H319: Causes serious eye irritation.Precautionary Statements (P-Statements)Prevention:P264: Wash skin thoroughly after handling.P280: Wear eye protection/face protection.Response:P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/attention.Additional Labelling (EUH-Statements)EUH208: Contains dibutyl [[bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate. May produce an allergic reaction. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com