Klüber STABURAGS NBU 12 ALTEMP Grease for bearings 400g cartridge

STABURAGS NBU 12 ALTEMP Lubricating grease for plain and rolling bearings | N° 005018STABURAGS NBU 12 ALTEMP is a mineral oil based lubricating grease for plain and rolling bearings operating at low to medium speeds. It has proven effective in lubricating points subject to external vibrations or oscillations. Containing solid lubricants, STABURAGS NBU 12 ALTEMP protects against fretting corrosion and is resistant to hot water.Temperature range: -15°C to +120°C​Volume: 400g cartridgeAlso available in: 1kg can Benefits for your applicationFor plain and rolling bearingsGood corrosion protectionResistant to hot waterSuitable for assembly purposesEffective on lubrication points subject to external vibrationsProtects against tribo-corrosionApplicationsSTABURAGS NBU 12 ALTEMP is used as a grease for rolling and plain bearings and for assembly purposes. It is suitable for slideways, threaded spindles, bearing seats and clamping chucks.Application notesThe product is applied by brush, spatula or conventional metering systems.When used as an assembly grease, it is applied to the entire component surface by hand, using a piece of cloth or a brush.Technical specificationsChemical composition solid lubricantChemical composition, thickener barium complex soapChemical composition, type of oil mineral oilLower service temperature -15 °C / 5 °FUpper service temperature 120 °C / 248 °FColour space beigeDensity at 20 °C approx. 1.08 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value 245 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value 275 x 0.1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 19 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 222.5 mm²/sShear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer approx. 10 000 mPasFunctional lubricant filmapprox. -40 °CSpeed factor (n x dm)350 000 mm/minDrop point, DIN ISO 2176, IP 396approx. 170 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.60 monthsHazard Information (CLP)Signal Word: WarningHazard Statements (H-statements)H302: Harmful if swallowed.H317: May cause an allergic skin reaction.H411: Toxic to aquatic life with long-lasting effects.Safety Instructions (P-statements)Prevention:P264: Wash skin thoroughly after handling.P273: Avoid release to the environment.P280: Wear protective gloves.Response:P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P362 + P364: Take off contaminated clothing and wash before reuse.P391: Collect spillage.Additional LabelingHazard-determining components: Reaction mixture of hydrogenated tallow alkylamines with sebacic acid and barium hydroxide, 4-Ethyl-2-(8-heptadecenyl)-2-oxazoline-4-methanol, Pin-2(3)-ene×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com