Klüber STABURAGS NBU 12 MF High performance grease 1kg can

High-performance lubricating greases for the long-term lubrication of rolling and plain bearingsSTABURAGS NBU 4 MF and STABURAGS NBU 12 MF are black lubricating greases based on mineral oil for rolling and plain bearings subject to high loads. The barium complex soap thickener ensures good adhesion of the grease to the lube point and thus good resistance to moisture and aggressive media. Both greases contain special solid lubricants based on MoS2, which improve emergency lubrication properties under high temperatures or loads.and protects reliably against corrosion.Size: 1kg canAvailable in 400g cartridge ,1kg can, 25kg bucket,Benefits for your application:Good pressure resistance in bearings subject to high loadsLong component life due to good wear protectionTrouble-free operation due to good sealing and corrosion protectionLess maintenance due to long-term lubricationEmergency lubricating properties for improved functionality in the case of starved lubricationApplication:STABURAGS NBU 4 MF has proven successful for the lubrication of high-speed rolling bearings in rolls, spindles, camrollers and tensioning rollers. The grease is also used for bearings in compressors and deep drilling machines.STABURAGS NBU 12 MF is used for highly loaded bearings, e.g. joints, spline shafts, couplings as well as pumps andelectric motors, for example in wood drying chambers.Both greases are also suitable for steel-on-steel material combinations in slideways and plain bearings.Application notes:STABURAGS NBU 4 MF / 12 MF are applied by brush, spatula or grease gun. For application via central lubrication systems, pumpability should be checked with the manufacturer beforehand. The friction points can be cleaned with standard detergents.Product data:Article number17065Chemical composition, solid lubricantmolybdenum disulphideChemical composition, thickenerbarium complex soapChemical composition, type of oilmineral oilLower service temperature-15 °C / 5 °FUpper service temperature130 °C / 266 °FColour spaceblackWorked penetration, DIN ISO 2137, 25 °C, lower limit value245 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value275 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox.  220 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox.  19 mm²/sCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKFEMCOR), test duration: 1 week, distilled water0 corrosion degreeCopper corrosion, DIN 51811, (lubricating grease), 24h/120 °C1 – 120 corrosion degreeDrop point, DIN ISO 2176, IP 396>= 220 °CFour-ball tester, welding load, DIN 51350 pt. 04>= 4 500 NWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating<= 1 - 90Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.60 monthsHazard Information (CLP)Signal word: WarningHazard Statements (H-phrases)H302 + H332: Harmful if swallowed or inhaled.H317: May cause an allergic skin reaction.Precautionary Statements (P-phrases)Prevention:P264: Wash skin thoroughly after handling.P271: Use only outdoors or in a well-ventilated area.P280: Wear protective gloves.Response:P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P362 + P364: Take off contaminated clothing and wash it before reuse.Hazardous Components for LabelingBarium salts4-Ethyl-2-(8-heptadecenyl)-2-oxazolin-4-methanolPin-2(3)-ene Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com