Klüber Summit HySyn FG 68 Synthetic food machinery compressor oil 20L

Fully synthetic compressor oils for the food-processing and pharmaceuticalindustryKlüber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oilsKlüber Summit HySyn FG oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separatorsKlüber Summit HySyn FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products andpackaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit HySyn FG oils can contribute to increase reliability ofyour production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCPContent: 20l canisterAvailable in 20l canister, 200l barrelBenefits for your applicationKlüber Summit HySyn FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570ISO 21469 certified – supports compliance with the hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.comLow maintenance and operating costs due to extended oil change intervals up to 4,000 operating hours in oilinjected screw-type compressorsEasy compressor conversion from mineral to the synthetic Klüber Summit HySyn FG oils due to miscibility and compatibility with common seal materialsLow tendency to evaporation and thus low impact of the oil vapour on the compressed airLong service of oils filters, activated carbon filters and oil separatorsAlso suitable for the lubrication of gears due to the high scuffing load capacityUsed and approved by Aerzener, Air Liquide, Boge, CompAir, Worthington, Getriebebau Nord, Lenze etc.ApplicationKlüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressorsKlüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapourwhich cannot be removed by the oil separator)Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressorsOwing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains,particularly those operating at low temperatures, e.g. in freezing tunnelsTechnical specificationsArticle number50015NSF-H1 registration133735Lower service temperature-40 °CUpper service temperature135 °CDensity, DIN 51757, 20 °Capprox. 0,83 g/cm³Foam test, ASTM-D 892, ISO 6247, sequence I/24 °C<= 150/10 mlFoam test, ASTM-D 892, ISO 6247, sequence II/ 93.5 °C<= 75/10 mlFoam test, ASTM D 892, ISO 6247, sequence III/24°C<= 150/10 mlDemulsifying capacity, DIN 51599, ASTM D 1401, at 54 °C40/37/3 mlFlash point, DIN EN ISO 2592, Cleveland, open-cup apparatus>= 240 °CKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 68 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 10.4 mm²/sViscosity index, DIN ISO 2909>= 120Copper corrosion, DIN EN ISO 2160, 24 h/100°C1 – 100 corrosion degreePour point, DIN ISO 3016<= -45 °CMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.60 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com