Klüber Summit SH 68 Synthetic air compressor oil 20l canister

Klüber Summit SH 68 Synthetic air compressor oils | N° 050006Klüber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives.They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.Pack sizes: canister  20 lBenefits for your applicationLow maintenance and operating costs due to extended oil change intervals up to 10,000 operating hours in oilinjected screw-type compressorsEasy compressor oil conversion due to neutral behaviour of oils towards sealsLow tendency to evaporation and thus low impact of the oil vapour on the compressed airLonger servie life of the oil filters, activated carbon filters and oil separatorsLow formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter andseparator lifeReduction of energy costs due to more energy efficient operationApplicationsKlüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours.Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils.They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected.Application notesWhen selecting the oil viscosity for air compressors please observe the manufacturers’ instructions. When switching a used compressor to a Klüber Summit SH oil, drain old oil from whole circuit of compressor while still warm.We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit SH oil.Technical specifications Appearance clear Density, DIN 51757, 20 °C approx. 0.86 g/cm³ Kinematic viscosity, DIN 51562 pt. 01/ASTMD-445/ASTM D 7042, 40 °C approx. 68 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTMD-445/ASTM D 7042, 100 °C approx. 9.8 mm²/s Viscosity index, DIN ISO 2909  >= 115 Flash point, DIN EN ISO 2592, Cleveland,open-cup apparatus  >= 240 °C Pour point, DIN ISO 3016 <= -36 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com