Klüberbeta VR 67-17002 Special soft grease for heating valves 1kg can

Klüberbeta VR 67-17002 Special soft grease for sanitary and heating valves and tapsA pasty, whitish special grease for valves and fittings.It is based on silicone oils which comply with drinking water regulations. It shows a high dynamic viscosity which is relatively insensitive to temperature.Klüberbeta VR 67-17002 is a thixotrope product, i.e. it behaves like a consistent lubricant when at rest, while under dynamic load it begins to flow.The product thus combines sufficient wetting of the friction point and hence sound lubrication with a good sealing effect and adhesion. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.Temperature range: -40°C to +160°C Volume: Can 1 kgAlso available in: Bucket 25 kgBenefits for your applicationProlonged service life of cartridges, valves and fittings due tocontinuous wetting of the friction surfacescompatibility with most standard elastomers and plasticsfriction and wear reduction in most material combinationsPrevents stick-slip and provides balanced damping of operationas temperature has little effect on lubricating film thicknessdue to high base oil viscosity (effect on actuating forces)Certified for use in drinking water and beverage tapsaccording to UBA (German Environmental Agency) guideline BWGL-KTW, NSF/ANSI/CAN 61, WRAS, ACS, Belgaqua, AS 4020, NSF H1 – further certifications available on requestNSF ISO 21469 certified – supports the compliance with the hygienic requirements in your production plant. ApplicationsKlüberbeta VR 67-17002 is suitable for drinking water and beverage taps as well as in heating installations, for example to improve the smooth operation of valves and fittings through defined actuating forces.Typical applications include the lubrication of ceramic discs, e.g. in single lever mixer taps, piston mixers, plastic taps, valves, thermostats, press fit seals and similar components.Klüberbeta VR 67-17002 has proven particularly successful as assembly lubricant for seals, collars and seal packings in cold and hot water as well as steam applications.Application notesBeing a silicone grease, Klüberbeta VR 67-17002 shows mostly neutral behaviour towards most metals, thermoplastics and elastomers.Technical specificationsArticle number022225NSF-H1 registration144 019Colour spacewhiteChemical composition, type of oilsilicone oilChemical composition, thickenersilicateLower service temperature-40 °C / -40 °FUpper service temperature160 °C / 320 °FDensity at 20 °Capprox. 1.05 g/cm³Unworked penetration, acc. to Klein, 25 °C, lower limit value240 x 0.1 mmUnworked penetration, acc. to Klein, 25 °C, upper limit value300 x 0.1 mmShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value20 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value46 000 mPasKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 25 °Capprox. 17 000 mm²/sMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 12 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com