Klüberbio LG 39-701 N Biodegradable grease for open gear drives 25kg

Klüberbio LG 39-701 N Eco-compatible operating lubricant for open gear drives | N° 009050Klüberbio LG 39-701 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces.The high-viscosity base oil of Klüberbio LG 39-701 N comes from 100 % renewable resources.Klüberbio LG 39-701 N complies with the 2013 Vessel General Permit requirements of the Environmental Protection Agency (EPA) in terms of biodegradability, minimal toxicity and bio-accumulation to be met by Environmentally Acceptable Lubricants.Volume: bucket 25 kgAlso available in: can 1 kg, bucket 18 kg, barrel 180 kgBenefits for your applicationComplies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 GP (Vessel General Permit)Lower environmental impact in the event of leakage. The base oil consists of renewable raw materials and is ultimately biodegradableGood low-temperature behaviour enables operation of open gear drives in cold conditionsSelected additives ensure longer component life and reduced wearCost reduction due to low consumption when applied by selected spraying systemsMeets requirements for OSPAR conformance, registered in Denmark, Norway, Netherlands and Great BritainApplicationKlüberbio LG 39-701 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for lubrication of rudder stocks and sliding surfaces with high surface pressure.The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high loadcarrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.Application notesKlüberbio LG 39-701 N can be continuously applied by means of transfer pinion lubrication, spray systems, automatic greasing systems or by brush.The required lubricant quantity and the upper service temperature range depend on the operating conditions in each individual application. Our sales engineers will be pleased to advise you.Technical specifications Manufacturer number   0090500177 Composition, thickener  calcium soap Composition, type of oil  natural ester Colour space beige Texture homogeneous Vessel General Permit  passed Biodegradability, OECD 301 F, within, 28 days  ≥ 60 % Density, Klüber method: PN 024, 20°C  approx. 0.94 g/cm³ Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 93 mm²/s Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 680 mm²/s Flow pressure, DIN 51805-2, -30°C  ≤ 1400 mbar Dropping point, DIN ISO 2176 / IP 396 ≥ 100 °C Four-ball tester, welding load, DIN 51350-4  ≥ 5500 NKlüberbio LG39-701N, Klüberbio LG 39 701 N Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com