Klüberfood NH1 94-301 Lubricating grease for food industry 25kg

Klüberfood NH1 94-301 Synthetic lubricating grease for the food processing and pharmaceutical industries | N° 096105Klüberfood NH1 94-301 is a special lubricating grease composed of a highly refined synthetic hydrocarbon base oil and calcium complex thickener. This lubricant is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.Klüberfood NH1 94-301, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety.Temperature range: -40°C to +140°C Volume: 25 kg Also available in: 400g cartridge, 25kg bucket, STAR 120 ml cartrigdeBenefits for your applicationIncreased component availability and extended maintenance intervalsdue to good wear protectiondue to good corrosion protectiondue to good pumpability in centralised lubrication systemsReduces friction and wear in linear guides and ball screws performing micro-movements owing to its good wear protection properties and flow characteristicsISO 21469 certified – supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website www.klueber.comApplicationsKlüberfood NH1 94-301 is used for the lubrication of rolling bearings, plain bearings and linear guides, e.g. in blow moulding equipment.Application notesKlüberfood NH1 94-301 can be applied by brush, spatula, grease gun or centralised lubrication system. Before applying Klüberfood NH1 94-301, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist, mandatory for food- safe H1 lubrication.Technical specifications Lower service temperature -40 °C / -40 °F Upper service temperature 140 °C / 284 °F Chemical composition, thickener calcium complex soap Chemical composition, type of oil synthetic hydrocarbon oil Colour space beige Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C <= 1 400 mbar Density at 20 °C approx. 0.98 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 310 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mm Drop point, DIN ISO 2176, IP 396 >= 250 °CHazards Information (CLP)Signal word: Warning.Hazard Statements (H-Statements)H319: Causes serious eye irritation.Precautionary Statements (P-Statements)Prevention:P264: Wash skin thoroughly after handling.P280: Wear eye protection/ face protection.Response:P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/attention.Additional Labelling (EUH-Statements)EUH208: Contains Sulfonic acids, petroleum, calcium salts; Benzenesulfonic acid, C10-16-alkyl derivs., calcium salts; Benzenesulfonic acid, mono-C16-24-alkyl derivs., calcium salts. May produce an allergic reaction. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com