Klüberfood NH1 94-402 Synthetic special lubricating grease 1kg

Klüberfood NH1 94-402 Synthetic special lubricating grease for the food processing and pharmaceutical industries | N° 096097Klüberfood NH1 94-402 is a special lubricating grease composed of a highly refined base oil and a calcium complex thickener.The use of Klüberfood NH1 94-402, an NSF H1-registered lubricant, can contribute to a safe product regime when used in accordance with food manufacturing regulations.Klüberfood NH1 94-402 is NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 94-402 can contribute to increase reliability of your production processes.We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.Volume: 1 kg can Also available in: , , 180 kg drumBenefits for your applicationIncreased component availability and extended maintenance intervalsowing to its good load-carrying capacitydue to good corrosion protectionReduces friction and wear, e.g. in rolling bearings, owing to its good wear protection properties and good flow characteristics.ISO 21469 certified- supports the compliance with hygienic requirements in your production plant.ApplicationKlüberfood NH1 94-402 is used for the lubrication of rolling bearings of machines and installations used in the foodprocessing industry, e.g. in the manufacture of grain, meal and pellet animal feeds.Application notesKlüberfood NH1 94-402 is applied by standard commercial grease application equipment, e.g. spatula, grease gun.Before applying Klüberfood NH1 94-402, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication.If the production process does not allow cleaning, we recommend the existing grease be replaced by purging the system during re-lubrication.Technical specifications Manufacturer number 0960970037 Colour space beige Texture  homogeneous Service temperature, lower limit -30 °C Service temperature, upper limit  160 °C NSF H1 registration number 139051 Density, Klüber method: PN 024, 20°C approx. 0.97 g/cm³ Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 53000-1, based on standard /ASTM D445 / ASTM D7042, 100°C approx. 40 mm²/s Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 53000-1, based on standard /ASTM D445 / ASTM D7042, 40°C approx. 400 mm²/s Flow pressure, DIN 51805-2, -30°C approx. 1400 mbar Dropping point, DIN ISO 2176 / IP 396 ≥ 250 °C Four-ball tester, welding load, DIN 51350-4 approx. 3000 NKlüberfood NH194-402, Klüberfood NH1-94-402Hazard Information (CLP)Signal word: Warning.Hazard statements (H-phrases)H319: Causes serious eye irritation.Precautionary statements (P-phrases)Prevention:P264: Wash skin thoroughly after handling.P280: Wear eye protection/ face protection.Response:P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/ attention.Additional labelling (EUH-phrases)EUH208: Contains Sulfonic acids, petroleum, calcium salts; Benzenesulfonic acid, C10-16-alkyl derivs., calcium salts; Benzenesulfonic acid, mono-C16-24-alkyl derivs., calcium salts. May produce an allergic reaction. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com