Klüberfood NH1 M 4-100N Fully synthetic high-performance oil 19L

Klüberfood NH1 M 4-100 N High-performance oils for high-speed can seaming machinesHigh-performance seaming oils are required to ensure the lowest maintenance efforts and achieve maximum machine reliability at your production site.Based on a modern base oil concept and a highly efficient additive package, Klüberfood NH1 M 4 N oils show reduced formation of residues and sludge.Temperature range: -30°C to +150°CVolume: Canister 19 lAlso available in: Drum, steel 208 lBenefits for your applicationCompliance with the highest food safety standards due to NSF H1 registration and ISO 21469 certificationReduced formation of sludge and increased oil lifetime due to excellent oxidation stability and modern oil technologyIncreased component lifetime due to good corrosion protection also in corrosive mediaExcellent wear protectionEfficient and quick separation from water and beverages in the oil reservoirApplicationsLubrication of can seaming machines with either recirculating or total loss systems, especially for those systems where contamination by water or beverages occurs, making filtration necessary.Circulating oil systems for bearings, chains and open gears of machinery in the food and beverage industry.Application notesWe recommend that the use of the Klüberfood NH1 M 4-100, -150, -220 oils has to comply with the instructions of the equipment supplier.Try to start with a clean or fully drained system.Always check on the compatibility of the Klüberfood NH1 M 4-100, -150, -220 oils with the previous or current lubricant in the system. Make sure that all filters are changed before starting up after an oil change in a recirculating filtration system.Technical specificationsArticle number029083AppearanceclearDemulsifying capacity, DIN ISO 6614, ASTM D 1401 at 82 °C40/40/0 (15) mlDensity, DIN 51757, 20 °Cenviron 0,848 g/cm³.Colour spaceyellowISO viscosity grade, DIN ISO 3448100Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D7042, 100 °Capprox. 14 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D7042, 40 °Capprox. 100 mm²/sAnti-corrosion properties on steel, ASTM D665 B, 24h/60°CpassedUpper service temperature150 °C / 302 °FLower service temperature-30 °C / -22 °F Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com