Klüberfood NHT1 1-18 Heat transfer oil for food industry 20L

Klüberfood NHT1 1-18 Premium heat transfer fluid for the food-processing and pharmaceutical industries | N° 029098Klüberfood NHT1 1-18 is based on highly refined hydrocarbons avoiding impurities that can occur in mineral oils. These impurities can initiate degradation of the oil and form carbon buildup on heater surfaces. Therefore the high purification level increases thermal stability and reduces fouling of the oil. As a consequence Klüberfood NHT1 1-18 allows you to reduce maintenance activities and extended oil change intervals can be achieved.The low base oil viscosity of Klüberfood NHT1 1-18 enables fast startups of your heating systems. In addition, its low viscosity and high density make Klüberfood NHT1 1-18 a highly efficient heat transfer fluid.Temperature range: -3°C to +330°C Volume: 20 l canister Also available in: 200 l barrelBenefits for your applicationHigh process reliability due to NSF HT1 and NSF H1 registration as well as ISO 21469 certificationExtended oil change intervals achievable due to highly refined napthenic base oilReduced maintenance efforts and dependable operation due to excellent thermal stabilityIncreased heat transfer efficiencyFast startups possible due to low base oil viscosityApplicationsKlüberfood NHT1 1-18 is exclusively recommended as a closed-loop heat transfer fluid. Thanks to its NSF HT1 registration, Klüberfood NHT1 1-18 is suitable for use as heat transfer fluid in the food and pharmaceutical industries. It can also be applied in various industries such as textiles, chemicals, automotive, asphalt, cement, wood, etc. Application notesKlüberfood NHT1 1-18 can be applied in new systems without prior cleaning, except when required for reasons of product quality. Residues of varnishes, oils and others from the system installation are usually not enough to affect the fluid lifetime. Klüberfood NHT1 1-18 is compatible with common heat transfer fluids.The start-up procedure or cleaning process should be done in compliance with the documentation of the manufacturer of the heat transfer system. In the presence of inert gas, the operating time of this fluid may be considerably extended. Technical specifications Article number 0290980766 Composition, type of oil  hydrated naphthenic mineral oil Maximum film temperature 342 °C Minimum Operating Temperature, 20 mPas 36 °C Minimum Start-up Temperature, 300 mPas -3 °C Service temperature, upper limit, fired heaters 315 °C Service temperature, upper limit, others heaters  330 °C NSF H1, HT1 registration number 156393 Density, DIN 51757, 15.6°C approx. 0.89 g/cm³ Flash point, DIN EN ISO 2719, Pensky-Martens closed cup  ≥ 149 °C Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C  approx. 20 mm²/sKlüberfood NHT1 1 18, Klüberfood NHT 1 1-18  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com