Klüberlub PHB 71-461 High-temperature lubricating grease 25kg

Klüberlub PHB 71-461 High-temperature lubricating grease | N° 020508Klüberlub PHB 71-461 is a special high-temperature lubricating grease based on mineral oil and polyurea. It is suitable for a wide service temperature range and can be used up to 180°C under continuous relubrication conditions.Klüberlub PHB 71-461 may be applied via centralized lubrication equipment.Klüberlub PHB 71-461 incorporates special EP additives ensuring good wear protection under high load conditions. Temperature range: -10°C to +180°C Volume: 25 kg bucketAlso available in: 400 g cartridge, 180 kg barrelBenefits for your applicationHigh-temperature lubricating grease for rolling bearings up to 180°CFor low to medium speedsGood pumpability in most commercially available lubrication systemsBlue colour, hence less risk of confusion / mixing etc.Good wear protection and high load-carrying capacityGood corrosion protectionResistant to waterApplicationsKlüberlub PHB 71-461 was especially designed for high temperature applications in continuous fibreboard presses.The grease is used for the lubrication of drum bearings, guide rollers, shaft bearings and plain bearings in Siempelkamp and Dieffenbacher fibreboard manufacturing equipment.Further applications include high-temperature lubrication points subject to high loads, moisture and temperature variations such as those found in:conveyorsdryerssteel millsApplication notesKlüberlub PHB 71-461 can be applied via most commercially available centralized lubrication systems.The product should be continuously purged through small bore pipes, which are exposed to high pressure and temperatureTechnical specifications Article number  0205080177 Composition, thickener  polyurea Composition, type of oil  mineral oil Colour space  blue Texture  homogeneous , long fibrous Service temperature, lower limit -10 °C Service temperature, upper limit  180 °C Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm Dropping point, DIN ISO 2176 / IP 396 ≥ 240 °C Speed factor (n x dm) 200000 mm/min Water resistance, DIN 51807-1, 3 h, 90°C  ≤ 1 – 90 ratingKlüberlub PHB 71461, Klüberlub PHB71461 Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com