Klüberoil GEM 1-46 N High-performance multipurpose oil 5L

Klüberoil GEM 1-46 N Klüberoil GEM 1 N is a high-performance and multipurpose oil based on selected mineral oils satisfying the growing requirements and increasing power density of modern gears. Klüberoil GEM 1 N includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear componentsCharacteristicsHigh scuffing protectionExcellent wear protection for gears and rolling bearingsGood shear stability for reliable lubricant film formationHigh micropitting resistanceExcellent ageing and oxidation resistanceLow foaming tendencyGood elastomer compatibilityApprovals by numerous gear OEMsVolume: 5l canisterAvailable in 400ml spray can, 5l canister, 200l barrelField of applicationfriction points subject to high loads in spurbevel and worm gearsrolling and sliding bearingsspindles, chains, guidewaysjoints and toothed couplingsTechnical specificationsLower service temperature: -15 °C Upper service temperature: 100 °CDensity, based on DIN 51757) at 15 °C: approx. 870 kg/m³Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 46 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 7 mm²/s Viscosity index, DIN ISO 2909: >= 90ISO viscosity grade, DIN ISO 3448: 46Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus: >= 200 °CPour point, DIN ISO 3016: <= -20 °CFoam test, ASTM-D 892, ISO 6247, sequence I/24 °C: <= 100/10 mlFoam test, ASTM-D 892, ISO 6247, sequence II/ 93.5 °C: <= 100/10 mlFoam test, ASTM D 892, ISO 6247, sequence III/24°C: <= 100/10 mlAgeing properties, ASTM D 2893, increase in viscosity: <= 6 %FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage: >= 14FZG scuffing test, based on DIN ISO 14635-1, A/16.6/90, scuffing load stage: >= 12FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of rolling element: < 5 mgFAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of cage: <= 200 mgAnticorrosive properties on steel, DIN ISO 7120, method A, steel, 24 h/60 °C: no rust corrosion degreeCopper corrosion, DIN EN ISO 2160, 3 h/100 °C: 1 - 100 corrosion degreeMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx: 60 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com