Klüberoil GEM 1-68 N High-performance gear oil 20l canister

Benefits for your applicationThe oils meet the requirements according to DIN 51517-3, CLP. Corresponding gears can be switched to Klüberoil GEM 1 N oils without prior consultation with the gear manufacturer provided the general application notes are observed.KlüberComp Lube Technology involves the selection of high-quality raw materials and individual consultation and services by Klüber, ensuring high-performance lubrication of different gearbox components.Klüberoil GEM 1 N oils offer a high scuffing load resistance of ISO VG 150 API GL-4 or higher. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations.The oils’ high micropitting resistance according to FVA 54 GFT ≥ 10 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.The good wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs.Much longer service life than mineral-oil-based standard gear oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced.Low foaming tendency as determined in the Flender foam test enable leakage and problem-free gear operation.Freudenberg seals made of 72 NBR 902, 75 FKM 585 and 75 FKM 170055 are resistant to Klüberoil GEM 1 N oils.Leakage and contamination are prevented.Approved by Siemens (Flender), Siemens Geared Motors, FLSmidth MAAG Gears, SEW Eurodrive, Getriebebau Nord,Lenze Gears, Stöber Antriebstechnik, ZAE Antriebssysteme, Moventas, Bonfiglioli etc.DescriptionKlüberoil GEM 1 N oils are gear and multi-purpose oils based on selected mineral oils with a high resistance to oxidation.They have a high resistance to scuffing and micropitting as laid down in FVA 54.The good antiwear characteristics of the Klüberoil GEM 1 N oils were also proven for rolling bearings in the standard FAG FE8 test rig for gear oils.ApplicationThe Klüberoil GEM 1 N oils were specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries.The Klüberoil GEM 1 N oils are also used for the lubrication of standard worm gears as defined in DIN 3996.They are also used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.Technical specifications Lower service temperature -15°C Upper service temperature 100 °C Density, based on DIN 51757) at 15 °C approx. 870 kg/m³ Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 680 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 37 mm²/s Viscosity index, DIN ISO 2909 >= 90 ISO viscosity grade, DIN ISO 344846 Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus >= 200 °C Pour point, DIN ISO 3016 <= -20 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com