Klüberpaste 46 MR 401 High-pressure lubricating paste 500g cartridge

Klüberpaste 46 MR 401 Light-coloured high-pressure lubricating pasteKlüberpaste 46 MR 401 is a multipurpose lubricating paste with selected base oils, lithium soap and special solid lubricant additives.This versatile multipurpose paste has a wide service temperature range and shows good pressure absorption capacity as well as neutral behaviour towards non-ferrous metals, many plastics and elastomers.Temperature range: -40°C to +150°C Volume: Cartridge 500 gAlso available in: Tube 60 g, Can 750 g, Bucket 30 kgBenefits for your applicationEasy assembly and disassembly of highly loaded frictional connectionsPrevents premature material ageing caused by tribo-corrosion and stick slipCan be used with many material combinations, including plastics and elastomersApplication:Klüberpaste 46 MR 401 is especially suitable as an assembly lubricant in frictional connections and for thin-film lubrication of all friction points subject to very high pressure loads, low sliding speed, high wear, Stick-Slip and tribo-corrosion.Typical applications include: press fit assembly of pins and bolts, mounting of rolling bearings, wheels and flanges, lubrication of rolling and plain bearings operating at very low speeds.Klüberpaste 46 MR 401 is also suitable to prevent running-in damage and stick-slip in components such as threaded spindles, spline shafts, ball and socket joints and rod end bearings.Application notesBefore applying Klüberpaste 46 MR 401 it is important to clean the contact surfaces and remove any solvent residues with a lint-free, dry cloth.Klüberpaste 46 MR 401 can be easily applied to the entire surface in a thin layer with a spatula. It is important to avoid overlubrication. Before applying the paste to a plastic material we recommend undertaking a materials compatibility test.Technical specificationsArticle number005108Lower service temperature-40 °C / -40 °FUpper service temperature150 °C / 302 °FColour spacewhiteDensity at 20 °Capprox. 1.23 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value300 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value340 x 0.1 mmFlow pressure of lubricating greases, DIN 51805-2, test temperature: -40 °C<= 1 600 mbarDrop point, DIN ISO 2176, IP 396>= 185 °CFour-ball tester, welding load, DIN 51350 pt. 04>= 4 600 NHazard Information (CLP)Signal word: Warning.Hazard statements (H-phrases)Very toxic to aquatic life with long lasting effects.Precautionary statements (P-phrases)Prevention:Avoid release to the environment.Response:Collect spillage.Supplemental label elements (EUH-phrases)Contains N-alkylated benzotriazole. May produce an allergic reaction. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com