Klüberplex AG 11-461 White operating and priming lubricant 5kg

White operating and priming lubricantsKlüberplex AG 11-461 and 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components.These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstillContent: 5kg bucketAvailable in 450g cartridge, 1kg can, 5kg bucket, 25kg bucketBenefits for your applicationReduced maintenance needs low contamination of machine environment due to use of white solid lubricants and low lubricant consumptionReduced maintenance needs very good adhesion even at low temperaturesReduced maintenance needs product streamlining possible as the product is suitable for gear rim / pinion drives and bearingsImproved component performance less wear due to selected solid lubricants and additivesImproved component performance very good corrosion protection also when exposed to salt waterApplicationKlüberplex AG 11-461 and 462 have been designed as priming lubricants for gear rim and pinion drives and can also be used as contrast lubricant for checking the drive’s load pattern.In the offshore sector, marine applications and wind power stations subject to salt water, open gears, low-speed rolling bearings, sliding and guide rails, steel cables of winches orcranes and similar components can be effectively lubricated and protected using Klüberplex AG 11-461 and 462Technical specificationsArticle number39213Solid lubricants, percentageapprox. 20 % by weightLower service temperature-20 °C / -4 °FUpper service temperature150 °C / 302 °FColour spacewhiteTexturehomogeneousDensity at 20 °Capprox. 1,07 g/cm³NLGI grade, DIN 518181Worked penetration, DIN ISO 2137, 25 °C, lower limit value310 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value340 x 0,1 mmISO viscosity grade of the base oil, DIN ISO 3448460Drop point, DIN ISO 2176, IP 396>= 180 °CFZG scuffing test, based on DIN ISO 14635, A/2,76/room temperature, scuffing load stage>= 12Functional lubricant filmapprox. -40 °CWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating0 – 90Minimum shelf life from the date of manufacture – in a dry, frostfree place and in the unopened original container, approx.24 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com