Klüberplex BE 31-102 Grease for extreme requirements 1kg can

Klüberplex BE 31-102 Lubricating greases for extreme requirements | N° 017135Klüberplex BE 31-102…-222…-502 are lubricating greases based on mineral oil and special calcium soap. They offer high resistance to mechano-dynamical loads and good adhesion properties. Klüberplex BE 31-102…-222…-502 are highly resistant to media, water and water vapour.Temperature range: -15°C to +120°C Volume: 1 kg canAlso available in: 400 g cartridge, 25 kg bucket, 180 kg drum Benefits for your applicationLonger component lifedue to reduced wear and good pressure absorption capacityReduced maintenance due togood sealing effect and resistance to water and other medialong relubrication intervals and good ageing and oxidation stabilityApplicationsKlüberplex BE 31-102…-222…-502 are lubricating greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings.These greases are used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.Application notesKlüberplex BE 31-102…-222…-502 greases can be applied by grease guns, brush or spatula. For application via central lubrication systems, please check pumpability with the manufacturer. Commercial detergents can be used for precleaning the friction points. Technical specifications Lower service temperature -15 °C / 5 °F Upper service temperature 120 °C / 248 °F Texture fibrous Colour space brown Density at 20 °C approx. 0.96 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value  295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTMD-445/ASTM D 7042, 40 °C approx. 100 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTMD-445/ASTM D 7042, 100 °C approx. 12 mm²/s Drop point, DIN ISO 2176, IP 396 >= 190 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com