Klüberplex BE 31-222 Lubricant for extreme requirements 400g cartridge

Lubricating grease for extreme requirements.Klüberplex BE 31-222 is a lubricating grease based on mineral oil and special calcium soap. It offers high resistance to mechano-dynamical loads and good adhesion properties. Klüberplex BE 31-222 is highly resistant to media, water and water vapour. We recommend testing compatibility prior to series application.Benefits:Longer component life due to reduced wear and good pressure absorption capacityReduced maintenance due to good sealing effect and resistance to water and other media and long relubrication intervals and good ageing and oxidation stabilityApplication:Klüberplex BE 31-222 is a lubricating grease for e.g. rolling and plain bearings, pivoting bearings, small gears.It can also be used as sealing and lubricating grease for labyrinth seals and industrial valves and fittings. This grease is used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.Application notes:Klüberplex BE 31-222 grease can be applied by grease guns, brush or spatula. For application via central lubrication systems, please check pumpability with the manufacturer. Commercial detergents can be used for precleaning the friction points.Compatibility with plastics and elastomersKlüberplex BE 31-222 grease is compatible with plastics that are resistant to mineral oil or greases based on mineral oil. However, for safety reasons, we recommend checking compatibility prior to series application.Product data: Lower service temperature -10 °C / 14 °F Upper service temperature 140 °C / 284 °F Texture fibrous Color space brown Density at 20 °C approx. 0.96 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 245 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 275 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 220 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 19 mm²/s Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Drop point, DIN ISO 2176 > 190 °C Speed factor (n x dm) 500 000 mm/min Flow pressure of lubricating greases, DIN 51805, test temperature: -10 °C <= 1 400 mbar Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened original container, approx. 36 months