Klüberquiet BQ 74-73N Rolling bearing grease 1kg can

Low-noise rolling bearing grease for the long-term lubrication of high-speedrolling bearingsKlüberquiet BQ 74-73 N is a rolling bearing grease based on synthetic hydrocarbon, ester oil and urea. It was especially developed for the lubrication of high-speed ball bearingsoperating at high temperatures. With its unique combination of carefully selected raw materials, Klüberquiet BQ 74-73 N offerslow-noise operation proved in tests on noise test rigs such as SKF BeQuietlong bearing lifewide service temperature range with excellent lowtemperature characteristicsContent: 1kg canAvailable in 1kg can, 25kg bucketBenefits for your applicationLifetime lubrication of vertically mounted bearings subject to high speeds and/or with a rotating outer ringLow-noise spindle bearing grease, also for motor spindlesApplicationKlüberquiet BQ 74-73 N was developed for applications requiring low-noise operation and long service lives, e.g. ball bearings in electric motors, fans, air conditioners, generatorsand belt tighteners in cars, spindle bearings as well as motor spindles in machine tools, electric as well as other household appliances and office equipment. Because of its consistency, Klüberquiet BQ 74-73 N can be used for rolling bearings that are mounted vertically or have a rotating outer ring.Technical specificationsArticle number94098Chemical composition, thickenerpolyureaChemical composition, type of oilester oilChemical composition, type of oilsynthetic hydrocarbon oilLower service temperature-40 °C / -40 °FUpper service temperature160 °C / 320 °FColour spacebeigeWorked penetration, DIN ISO 2137, 25 °C, lower limit value220 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value250 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 60 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 9,5 mm²/sCorrosion inhibiting properties of lubricating greases, based on DIN 51802, SKF-EMCOR, test duration: 1 week, 5 % NaCl solution<= 3 corrosion degreeSpeed factor (n x dm)approx. 2 000 000 mm/minCopper corrosion, DIN 51811, (lubricating grease), 24h/100°C1 - 100 corrosion degreeCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeDrop point, DIN ISO 2176, IP 396>= 250 °CSKF-ROF rolling bearing tester, axial load: 100 N, radial load: 50 N, speed: 10000 min-1, temperature: 160 °C, service life F50>= 1 500 hLow-temperature torque, IP 186, -40 °C, running<= 100 mNmLow-temperature torque, IP 186, -40 °C, start<= 1 000 mNmWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating<= 1 - 90Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.36 monthsHazard Information (CLP)Signal word: Danger.Hazard Statements (H-phrases)H411: Toxic to aquatic life with long lasting effects.Precautionary Statements (P-phrases)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com