Klüberquiet BQH 72-102 High-purity rolling bearing grease 25kg bucket

High-purity rolling bearing grease for long-term lubrication.Klüberquiet BQH 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing  environment, Klüberquiet BQH 72-102 is a rolling bearing grease with a particularly low noise level. Klüberquiet BQH 72-102 offers excellent performance characteristics thanks to a high-quality ester oil, a new polyurea thickener and special additives. It is special in that it combines high-temperature resistance andextreme purity.Benefits for your application:Cost savings due to long service life of grease at > 80°CSmooth running, low noiseWide service temperature range allows a variety of applicationsLong bearing life due to excellent water resistanceApplication:In a wide variety of ball bearings operating under extreme thermal stress, Klüberquiet BQH 72-102 is used for long-term or lifetime lubrication. Such applications include ball bearings in electric motors, fans, air conditioners, generators and belt tensioners in cars, power tool as well as household appliances and office equipment.Application notes:The lubricant is applied by means of a spatula, brush, grease gun or grease cartridge. We recommend completely removing preservatives before applying the grease. Preservatives for permanent use should be checked for purity and chemical compatibility with Klüberquiet BQH 72-102. We can recommend suitable preservatives on request.The possibility of a change in colour is inherent in this product concept. It has, however, no influence on product performance.Product data: Article number 094023 Chemical composition, thickener polyurea Chemical composition, type of oil ester oil Lower service temperature -40 °C / -40 °F Upper service temperature 180 °C / 356 °F Color space beige Texture fibrous Texture homogeneous Density at 20 °C approx. 0.99 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 250 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 280 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 100 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 11 mm²/s Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Drop point, DIN ISO 2176, IP 396 >= 250 °C Noise test run, SKF BeQuiet+, noise classes >= GN3 Speed factor (n x dm) approx. 700 000 mm/min Testing of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt. 02, speed: 6000 min-1, axial load: 1500 N, temperature: 180 °C, service life F50: >= 100 h SKF-ROF rolling bearing tester, axial load: 100 N, radial load: 50 N, speed: 10000 min-1, temperature:170 °C, service life F50: >= 1 000 h Low-temperature torque, IP 186, -40 °C, running <= 150 mNm Low-temperature torque, IP 186, -40 °C, start <= 1 000 mNm Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating 0 - 90 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months Hazard Statements (CLP)Signal Word: Danger.Hazard Statements (H-phrases)H411: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-phrases)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com