Klübersynth BEM 34-32 Synthetic smooth-running grease 45g tube

Synthetic smooth-running grease for linear guides and bearings in clean room production areasKlübersynth BEM 34-32 is a special high pressure, synthetic, smooth-running grease for use across a wide service temperature range. Its excellent ageing stability allowsextended relubrication intervals or lifetime lubrication to be accomplishedContent: 50g tubeAvailable in 50g tube, 60g cartridge, 400g cartridgeBenefits for your applicationenables low starting and running torquehigh pressure absorption capacitygood wear protectionexcellent oxidation and ageing stabilitygood water and media resistanceApplicationPARALIQ 91 is used as release agent for baking tins and moulds in the food-processing industry. The lubricant can also be used as high-performance needle and sinker oil in textile machines as well as for deep-drawing or bending of packages for the pharmaceutical and foodprocessing industriesThis special oil is tried-and-tested as release agent for moulds in blister machines used for the deep-drawing of film (bottom film)Application noteThe low base oil viscosity of Klübersynth BEM 34-32 ensures smooth running of linear guides, ball bushings, ball screws, rolling bearings, plain bearings as well as small gear systems in all sectors which are not subject to high vacuum, high temperatures or aggressive media. Due to the excellent metal adhesion properties, Klübersynth BEM 34-32 achievesconsiderably lower wear rates than many PFPE-based greases used under similar application conditions. The product is compatible with most plastic seals and cage materialsTechnical specificationsArticle number4127Chemical composition, thickenerspecial calcium soapChemical composition, type of oilsynthetic hydrocarbon oilLower service temperature-40 °C / -40 °FUpper service temperature130 °C / 266 °FColour spacebeigeTextureshort-fibredTexturehomogeneousWorked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 31 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 5,9 mm²/sNLGI grade, DIN 518182Speed factor (n x dm)approx. 1 000 000 mm/minShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value2 800 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value5 200 mPasCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeDrop point, DIN ISO 2176, IP 396>= 220 °CWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating1 – 90Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com