Klübersynth BMQ 72-162 Long-term lubricating grease 500g cartridge

Klübersynth BMQ 72-162 For lifetime lubrication at low and high temperatures | N° 094073Klübersynth BMQ 72-162 is a synthetic long-term lubricating grease. It is based on ester oils and perfluorinated polyether oil. Its outstanding characteristics are good oil retention at high permanent temperatures and good corrosion protection as well as water resistance.Temperature range: -40°C to +200°C Volume: 500g cartridgeAlso available in: 600g can, 30 kg bucket Benefits for your applicationLow component noise at high temperaturesdue to innovative hybrid grease formulationdue to the addition of fluorinated base oilsHigh component performancedue to a wide service temperature rangedue to good corrosion and wear protection propertiesApplicationsKlübersynth BMQ 72-162 is preferably used for plain and rolling bearings at high and low temperatures requiring good thermal stability but where the use of silicone is forbidden. It has proven successful for the lifetime lubrication of rolling bearings in electric motors, smoke extractor motors and clutch release bearings.Application notesIt is not necessary to remove the anticorrosive film in rolling bearings prior to applying Klübersynth BMQ 72-162. The lubricant can be removed using organic solvents.To attain a maximum service life and minimum noise level we recommend thorough cleaning of the friction point and seeking detailed service advice from our application engineers.Technical specifications Chemical composition, thickener polyurea Chemical composition, type of oil PFPE Chemical composition, type of oil ester oil Lower service temperature -40 °C / -40 °F Upper service temperature 200 °C / 392 °F Colour space beige Density at 20 °C approx. 1.30 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 240 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 270 x 0.1 mm Base oil viscosity at 40 °C, calculated value approx. 160 mm²/s Base oil viscosity at 100 °C, calculated value approx. 27 mm²/s Drop point, DIN ISO 2176, IP 396 >= 250 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com