Klübersynth BQP 72-82 Long-term bearing grease 1kg can

Klübersynth BQP 72-82 Rolling bearing grease for long-term lubrication | N° 094116Klübersynth BQP 72-82 is designed for small rolling bearings in which material fatigue due to vibration in combination with pressure and temperature can occur.It is based on ester oil and polyurea thickener and made according to a special manufacturing procedure, facilitating smoother running of rolling bearings.With its above-average corrosion protection properties, it also extends the lifetime of rolling bearings.Temperature range: -40°C to +180°C Volume: 1kg canBenefits for your applicationExtended component lifetimesmooth running, especially in small rolling bearings ensures protection against premature material fatigueabove-average corrosion protection avoids corrosion damageimproved vibration resistance owing to optimised wear protectionBased on modern raw materials according to Bosch standard N 2580 (2008)ApplicationsKlübersynth BQP 72-82 is preferably used for highly-loaded generator bearings, fan bearings and bearings in driving and electric motors, e.g. in cars.Application notesKlübersynth BQP 72-82 can be applied by means of brush, spatula, and automatic dosing units for small quantities or conventional dosing systems. The product is normally suitable for central lubricating systems. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed with the system manufacturer for each individual application. We will be pleased to provide assistance in this matterTechnical specifications Chemical composition, thickener polyurea Chemical composition, type of oil ester oil Lower service temperature -40 °C / -40 °F Upper service temperature 180 °C / 356 °F Colour space beige Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 280 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 310 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 80 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 11 mm²/s Drop point, DIN ISO 2176, IP 396 >= 250 °C Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90 Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com