Special grease for small gears.Klübersynth G 34-130 is a lubricating grease based on synthetic hydrocarbon oil, mineral oil, special Ca soap and polyurea. It has a wide service temperature range, good antiwear properties and high resistance to ageing. Klübersynth G 34-130 provides excellent protection against tribocorrosion resistance to water and good adhesion.Benefits for your application:Special grease for small gearsSuitable for aluminium componentsWide service temperature rangeGood protection against wearExcellent protection against tribocorrosionEasily applicable through automatic metering devicesApplication:For gears, bearings, joints and slideways, for example in machines for craftsmen and do-it-yourselfers. Generally suitable for small and miniature gears with steel/steel, steel/plastic and plastic/plastic friction components. Klübersynth G 34-130 is particularly suitable for slideways with aluminium sliding components and for the lubrication of trapezoidal or ball-type threaded spindles.Application notes:Immersion lubrication of gears up to a peripheral speed of approx. 5 m/s and for tooth flank greasing up to approx. 4 m/s.The product is applied by brush, spatula or automatic metering devices. The product can normally be applied by means of centralised lubricating systems. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed for each individual application. We will be pleased to provide assistance in this matter.Service temperature range:We recommend a general service temperature range between approx. – 30 and 130 °C. Immersion lubrication is possible starting from approx. – 20 °C, and the applied lubricant film (e.g. on tooth flanks) is functional to approx. – 40 °C.Indicated service temperatures are guide values depending on the lubricant’s structure, the intended use and the application technology.Product data: Article number 020501 Color space beige Texture homogeneous Density at 20 °C approx. 0.87 g/cm³ Texture short-fibred Worked penetration, DIN ISO 2137, 25 °C, lower limit value 355 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 385 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 130 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 15.5 mm²/s NLGI grade, DIN 51818 0 Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 2 500 mPas Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 800 mPas Drop point, DIN ISO 2176, IP 396 >= 180 °C Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 24 monthsHazard Information (CLP)Signal word: Warning.Hazard statements (H-phrases)H317: May cause an allergic skin reaction.Precautionary statements (P-phrases)Prevention:P272: Contaminated work clothing should not be allowed out of the workplace.P280: Wear protective gloves.Response:P302 + P352: IF ON SKIN: Wash with plenty of soap and water.P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P362 + P364: Take off contaminated clothing and wash it before reuse.Hazardous components:4-ethyl-2-(8-heptadecenyl)-2-oxazoline-4-methanol Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com
Klübersynth G 34-130 Special grease for small gears 1kg
131đ
Thông tin liên hệ
VietNam-Industry guarantees 100% product quality for Klübersynth G 34-130 Special grease for small gears 1kg as requested by customers and provides all MSDS, TDS, SDS, Invoices, and Export Declarations for each product. If you would like to purchase this product, please contact VietNam-Industry to receive the earliest quotation — we will support and advise you in choosing the most suitable Klübersynth G 34-130 Special grease for small gears 1kg for your needs.
For product consultation and quotes, please contact us immediately via the following details:
☎️ Hotline: 0966068726 (Zalo / Whatapp)
📧 Email: [email protected]
🌐 Website: https://vietnam-industry.com
🗺️ Address: Le Hong Phong Street, Ngo Quyen District, Hai Phong City, Vietnam
Related products
Industrial safety products & workwear
F-35510 ULME Water resistant safety boots in PVC with steel toe cap S4
Cut resistant gloves
Stronghand 0844 Caracas Cut Resistant Arm Sleeves grey 45 cm level C
Arm & Knee Protection
Stronghand 08475 Cut Resistant Arm Sleeves neon yellow 45cm level D
Forestry lace up boots
Craftland 35540 ZEDER Safety chainsaw boots black EN 17249 S2 39-47
Hi Vis Sweatshirts
Hi Vis Shirts & Polo Shirts
High Visibility Long sleeve T-Shirt yellow S-4XL, Safestyle 22694
Hi Vis Shirts & Polo Shirts
Coated protection gloves
Stronghand 0220 Cowhide Leather Winter Work Gloves size 10.5
Coated protection gloves
Surf 0458 Nitrile chemical safety gloves green EN 388 / EN 374 Cat. 3
Arm & Knee Protection
Hi Vis Shirts & Polo Shirts
Portwest S279 High visibility longsleeve polo shirt orange/navy S-4XL
Hi Vis Shirts & Polo Shirts
Modern look High visibility T-Shirt Orange XS-5XL Portwest RT23 RIS
Hi Vis Shirts & Polo Shirts
Engel 9544-182 modern high visibility T-Shirt orange/green XS – 6XL
Hi Vis Shirts & Polo Shirts
Engel 9544-182 Modern high visibility T-Shirt red/black XS-6XL
Hi Vis Shirts & Polo Shirts
Two Tone High Visibility Safety T-Shirt yellow/orange, Elysee 22725
Hi Vis Shirts & Polo Shirts
Hi-Vis Breathable Safety Polo Shirt orange S-4XL Safestyle 22698
Cut resistant gloves
OptiFlex 0845 Heat & Cut Resistant Arm Sleeves 45 cm level D
Hi Vis Shirts & Polo Shirts
Hi-Vis Safety T-Shirt with UV protection yellow S-4XL Safestyle 22697