Klübersynth GE 14-111 Special grease for small gears 180kg

Speciality greases for small gears operating under heavy loads and with a high percentage of sliding friction.Do you need to design small, grease-lubricated gearboxes that are both efficient and powerful? Does increasing power density pose an additional challenge? If so, you will probably also have to observe a wide service temperature range as well as excellent wear protection. Our Klübersynth GE 14-111 special greases are the right solution for such tasks.Based on our many years of experience, we have developed these speciality greases consisting of synthetic hydrocarbons, ester oil and an aluminium complex soap thickener. With their precisely tuned additives and the solid lubricants contained, the products offer excellent wear protection over a wide service temperature range. We are pleased to discuss application details with you.Your benefits at a glance:Excellent wear protection and high pressure absorption capacityReliable lubricant film formation in a wide service temperature rangeExcellent protection against tribo-corrosionHigh scuffing-load strength with minimum-quantity lubricationApplication:You may use Klübersynth GE 14-111 for the lubrication of gears, bearings, joints or slideways in small gears that are subject to heavy leads, e.g. in household  or workshop power tools. Due to its good scuffing load strength and backflow characteristics, Klübersynth GE 111 can also be applied in toothed gears with a  high percentage of sliding friction. Depending on temperature, loads and sliding speeds, steel/steel, steel/aluminium and aluminium/aluminium combinations can be lubricated with these greases.Additionally, Klübersynth GE 14-111 offer smooth running and excellent wear protection when used for lubricating trapezoidal spindles.Application notes:Klübersynth GE 14-111 are supplied ready for use. They can be applied using a spatula, brush or grease gun. Lowcost application with fully automatic standard (micro) metering systems is also possible. Please note, however, that due to different system configurations and application conditions the pumpability of the products has to be confirmed.We will be glad to support you with application-specific advice.Product data: Article number 012253 Chemical composition solid lubricant Chemical composition, thickener aluminium complex soap Chemical composition, type of oil ester oil Chemical composition, type of oil synthetic hydrocarbon oil Lower service temperature -55 °C / -67 °F Upper service temperature 140 °C / 284 °F Color space yellow Texture fibrous Texture homogeneous Worked penetration, DIN ISO 2137, 25 °C, lower limit value 320 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 360 x 0.1 mm Shear viscosity at 25 °C, shear rate 300 s-1; equipment: rotational viscometer approx. 3 000 mPas Drop point, DIN ISO 2176, IP 396 >= 200 °C Anti-brinelling test, acc. to SNR FEB 2, frequency 24 Hz, deflection 3, load 8000 N, 50 h at 25 °C, wear <= 5 mg Flow pressure of lubricating greases, DIN 51805, test temperature: -55 °C <= 1 400 mbar Four-ball tester, welding load, DIN 51350 pt. 04 >= 4 000 N Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 12 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com