Klübersynth GE 46-1200 Synthetic long-term fluid grease 400g cartridge

Klübersynth GE 46-1200 Synthetic long-term fluid grease with excellent anticorrosive effect | N° 027035Small gear systems demand high efficiency and a lubricant with a wide temperature range along with a long service life.Our fully synthetic long-term fluid gear grease Klübersynth GE 46-1200 based on a polyglycol base oil and a lithium soap thickener was especially developed to meet the tough requirements of advanced small gears.The combination of base oil and additives offers optimised wear protection under mixed friction and good pressure absorption capacity in the lubrication of gears.Klübersynth GE 46-1200 also offers excellent corrosion protection and good compatibility with sealing elastomers. Volume: Cartridge 400gAlso available in: Can 1 kg, Bucket 25 kg, Drum 180 kgBenefits for your applicationReliable lubricant film formation in a wide service temperature rangeGood wear protection and high pressure absorption capacityOptimised friction behaviour leading to higher efficiencyGood seal life due to excellent compatibilityExcellent backflow to the friction pointExcellent ageing and oxidation resistance for long service lifeApplicationWe developed Klübersynth GE 46-1200 on the basis of our long experience in the lubrication of spur, bevel and worm gears.Especially for steel/steel combinations, for example in small and miniature gears, gear motors and power tool gears, Klübersynth GE 46-1200 offers outstanding performance characteristics.Application notesMedium peripheral speeds of 4-5 m/s can be effectively handled by this grease. It also provides vibration and noise damping. Klübersynth GE 46-1200 can also be used to optimise the lubrication of ball and roller guides, plain and rolling bearings, and toothed couplings from – 30 to 120 °C.Product data: Article number 027035 NLGI grade, DIN 51818 00 Color space brown Texture homogeneous Density at 20 °C approx. 0.99 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 400 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 430 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 120 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 20 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer <= 2 000 mPas Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C 1 - 100 corrosion degree FZG scuffing test, DIN ISO 14635-1, A/8.3/90, change in weight < 0.2 mg/kWh FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage > 12 Drop point, DIN ISO 2176, IP 396 >= 160 °C Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 24 months Hazard Information (CLP)Signal word: Warning.Hazard Statements (H-phrases)H317 May cause an allergic skin reaction.Precautionary Statements (P-phrases)Prevention:P272 Contaminated work clothing should not be allowed out of the workplace.P280 Wear protective gloves.Response:P302 + P352 IF ON SKIN: Wash with plenty of water and soap.P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.P362 + P364 Take off contaminated clothing and wash it before reuse.Hazardous Components for LabelingMolybdenum trioxide, reaction products with Bis [O,O-bis(2-ethylhexyl)] hydrogen dithiophosphateCondensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com