Klübersynth GH 6-320 Synthetic high-performance gear oil 5L

Klübersynth GH 6-320 Synthetic high-performance gear and high-temperature oil with KlüberComp Lube TechnologyBased on polyglycol satisfying the growing requirements and increasing power density of modern gears.It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.Volume: Canister 5lAlso available in: canister 20l, Drum 200lBenefits for your applicationHigh scuffing protectionExcellent wear protection for gears and rolling bearingsGood shear stability for reliable lubricant film formationHigh micropitting resistanceOptimised for the lubrication of worm gearsExcellent ageing and oxidation resistanceWide service temperature range due to good viscosity-temperature behaviourLow foaming tendencyEnergy savings due to optimised friction behaviourGood elastomer compatibilityApprovals by numerous gear OEMsApplicationKlübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings.Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures.It can also be used for the lubrication of lifting, drive and transport chains.Application notesKlübersynth GH 6 can be applied by means of immersion, immersion circulation or injection.The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible.When using automatic lubricating systems, please note the manufacturer’s instructions regarding the maximum permissible viscosity.The low-viscosity varieties are also used for oil mist lubrication.Technical specificationsArticle number012162Lower service temperature-30 °C / -22 °FUpper service temperature160 °C / 320 °FISO viscosity grade, DIN ISO 3448320Density, based on DIN 51757) at 15 °Capprox. 1 067 kg/m³Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 20 °Capprox. 880 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 320 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 54 mm²/sViscosity index, DIN ISO 2909>= 230Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus>= 250 °CPour point, DIN ISO 3016<= -30 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com