Klübersynth GHE 6-100 Synthetic gear and circulating oil 20L canister

Klübersynth GHE 6-100 Synthetic gear and circulating oil (ISO VG 100) | N° 012278Klübersynth GHE 6 oils are polyglycol-based gear and circulating oils particularly resistant to ageing and oxidation offering high scuffing load capacity.Owing to their polyglycol base oil, Klübersynth GHE 6 oils have a good viscosity-temperature and excellent high-temperature behaviour.Temperature range: -35°C to +160°C Size: 20 canisterAlso available in: Canister 5 l, Drum 200 lBenefits for your applicationKlübersynth GHE 6 oils offer much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the synthetic base oil; thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible.Its high scuffing load resistance offers good scuffing protection even at high peak loads.The good wear protection of both gears and rolling bearings prevents premature component failure, leading to lower maintenance and repair costs.The optimum friction behaviour of the polyglycol base oil reduces power losses and improves efficiency.The excellent viscosity-temperature behaviour supports the formation of a separating lubricating film even at elevated temperatures.Seals made of 72 NBR 902, 75 FKM 585 and 75 FKM 170055 are resistant to Klübersynth GHE 6 oils. Leakage and contamination are prevented.Approved by Flottweg Separation TechnologyApplicationsKlübersynth GHE 6 oils were specially developed for the lubrication of spur, bevel, planetary and worm gears.Klübersynth GHE 6 oils are also used for the lubrication of rolling and plain bearings as well as all kinds of toothed couplingsApplication notesKlübersynth GHE 6 oils can be applied by immersion, immersion/circulation and injection.Klübersynth GHE 6 oils are not miscible with mineral oils and synthetic hydrocarbons. Prior to switchover, lubrication points should be cleaned, or gears or enclosed systems be flushed with Klübersynth GHE 6.Klübersynth GHE 6 oils are neutral towards virtually all nonferrous metals. Technical specificationsArticle number0122780766Service temperature, lower limit-35 °CService temperature, upper limit160 °CDensity, DIN 51757, 15°C1043 kg/m³Flash point, DIN EN ISO 2592, Cleveland open cup≥ 250 °CFoam test, ISO 6247 / ASTM D892, 24°C, sequence I≤ 100/10 mlFoam test, ISO 6247 / ASTM D892, 24°C, sequence III≤ 100/10 mlFoam test, ISO 6247 / ASTM D892, 93.5°C, sequence II≤ 100/10 mlISO viscosity grade, DIN ISO 3448ISO VG 100Kinematic viscosity, DIN EN ISO 3104 / DIN 53000-1, based on standard / ASTM D445 / ASTM D7042, 100°Capprox. 20 mm²/sKinematic viscosity, DIN EN ISO 3104 / DIN 53000-1, based on standard / ASTM D445 / ASTM D7042, 20°Capprox. 270 mm²/sKinematic viscosity, DIN EN ISO 3104 / DIN 53000-1, based on standard / ASTM D445 / ASTM D7042, 40°Capprox. 100 mm²/sViscosity index, DIN ISO 2909≥ 190Copper corrosion, DIN EN ISO 2160, 24 h, 100°C1 – 100 – 24 corrosion degreeSteel corrosion, DIN ISO 7120 / ASTM D665, method A, 24 h, 60°Crust-freePour point, DIN ISO 3016, ASTM D97, ASTM D5950, ASTM D7346≤ -40 °CFAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of cage≤ 200 mgFAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of rolling elements≤ 30 mgFZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage≥ 14Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.36 monthsHazard Statements (CLP)Signal word: Danger.Hazard Statements (H-phrases)H411: Toxic to aquatic life with long-lasting effects.Precautionary Statements (P-phrases)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage. ×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com