Klübersynth UH1 14-151 Lubricating grease for food industry 1kg

Synthetic lubricating grease for the food and pharmaceutical processing industry.Klübersynth UH1 14-151 was especially developed for the food processing and pharmaceutical industry. Klübersynth UH1 14-151 shows good anti-wear  properties, water resistance and corrosion protection as well as a high ageing and oxidation stability.Klübersynth UH1 14-151 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with  products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 14-151 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.Volume: 1kg tinAlso available in: , , , Benefits for your application:Good corrosion protection reduces the risk of premature bearing failureGood pumpability in centralized grease system prevents grease starvationFor a wide service temperature range due to the soft consistency of the greaseISO 21469 certified – supports the compliance with the hygienic requirements in your production.Application:Used for machines and equipment in the food processing and pharmaceutical industry, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product. However, we recommend using Klübersynth UH1 14-151 at all lubrication points, in order to avoid problems due to lubricant contamination.This special grease lubricates rolling and sliding bearings, lifting cylinders, joints, guide bars, cams, etc.Application notes:Klübersynth UH1 14-151 is applied by brush, spatula, grease gun and grease cartridge or by means of centralized lubrication systems.Before substituting other greases with Klübersynth UH1 14-151 the bearings have to be cleaned and greased. If the greases are miscible, the grease can be exchanged by means of relubrication.Product data: NSF-H1 registration 056 354 Lower service temperature -45 °C / -49 °F Upper service temperature 120 °C / 248 °F Speed factor (n x dm) approx. 500 000 mm/min NLGI grade, DIN 51818 1 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, lower limit value 310 x 0.1 mm Flow pressure of lubricating greases, DIN 51805, test temperature:-45 °C <= 1 400 mbar Density at 20 °C approx. 0.89 g/cm³ Drop point, DIN ISO 2176 >= 250 °C Texture homogeneous Color space beige Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 24 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com